View Full Version : abs light on and cant turn traction control back on
4drcbra
10-24-2010, 06:24 AM
Anyone know?
FordNut
10-24-2010, 06:38 AM
What were the latest repairs or mods?
Maybe an ABS sensor?
Black_Noise
10-24-2010, 08:13 AM
did you have the tires rotated, bigger in the back not the front, unless you have a 300a
4drcbra
10-24-2010, 10:41 AM
Nope only a tune about 3 months ago
Paul T. Casey
10-24-2010, 02:40 PM
Try the disconnect the battery trick, see if that clears the issue(s). If you have a scanner, check for trouble codes.
Black_Noise
10-24-2010, 02:47 PM
probably have a bad wheel speed/ abs sensor, thus automatically turning off the abs and traction systems, you should be able to use your programmer to check for codes
FordNut
10-24-2010, 03:17 PM
Most of our programmers only show engine/trans codes, not chassis codes. I would first look at the sensors and make sure they're all physically in place, then if there is still a problem it will probably have to go to the dealer and be connected to their scanner. I had problems with one of the sensors on my Exploder, they put it on a lift and connected the scanner, then turned the wheels one at a time to see which one didn't put out a signal. Physically it looked fine, but it didn't work.
4drcbra
10-24-2010, 04:17 PM
Cool Thx for the info. Im going to the dealer to use my dusty only used once warranty
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.