2.8" blower pulley belt size?

[Bradley G]

Ok , the Air intake temp sensor relocate is done. the last thing I need is a shorter belt for the 2.8" pulley.
I have a revised alternator bracket on my car .
TIA

[Bradley G]

Doomie? help
I guess I could take mine off and measure it .
Anybody know how much shorter the belt should be
going from 3.4" pulley to 2.8"?
The guy I chose to tune the car Lonnie Doll @BOC, is a half days drive and I won't have access to FLAPS.
I'll know today if the car will get done this week.

[Speed]

I'm by far not an expert but I was told... again this is what I was told that the belt length is 49.5" with the 2.8" pulley.

[Sully008]

Gates Green Belt - K080496 (8PK1261) - 50 1/8"

[Speed]

Gates Green Belt - K080496 (8PK1261) - 50 1/8"

Thats for a 3.0 pulley, correct?

[Bradley G]

that part # is 49.6" that is what I ordered

[Dragcity]

Bradley. Going straight to 2.8" Wow, good for you. I have a 3.0" in the que. So much to do, but was just thrown a curve ball.

I cannot believe how expensive the Ford Edge Limited is....... Wife's getting a new ride.

Good luck brother.

[Sully008]

Thats for a 3.0 pulley, correct?


I got the part # from here:

http://www.motorcitymarauders.com/forums/showthread.php?t=10220&highlight=gates+belt

Originally Posted by O's Fan Rich
You guy's running a 2.8 upper pulley- What size belt do you have on?

Lidio suggested an 080495- 49.5 inches.... can't get it on.

On my 3.0 I'm running n080505-50.5 inches. That one fits with the 2.8, but the tensioner is almost all the way out.

I don't see a size in between on any belt charts. A 50 inch belt would be just right, I think.

Originally Posted by Glenn Ford http://www.motorcitymarauders.com/forums/images/buttons/viewpost.gif (http://www.motorcitymarauders.com/forums/showthread.php?p=114013#post11 4013)
Try a Gates Green Belt - K080496 (8PK1261) - 50 1/8". It may fit?. http://www.motorcitymarauders.com/forums/images/smilies/dunno.gif

Originally Posted by O's Fan Rich
Glenn is correct.
After getting Mat Pearce to verify his belt size, this is the animal.


:dunno:

[Bradley G]

I got both the 49.5" and the 50.5"
Thanks guys!