PDA

View Full Version : nakke/qa1 rears?


MOTOWN
11-03-2010, 01:52 PM
any body have a link, or part# for the naake/qa1 rear shocks? im thinking about trying a pair:help:

never mind just found the link
Dr Caleb
11-03-2010, 02:34 PM
The QA1 part # for the Rear Shocks:

DMU7855P
http://www.summitracing.com/parts/HAL-DMU7855P/

Shock Eyelet components:

Advice Rich gave me:

"On page 74 of the QA1 catalog (2007) are the shock eyelet kits. Measure your bolts and mounts to get the proper front and rear sizes. The order the kit."
# or # SLV 625"

"You might also be able to make your own mounts up."

http://www.summitracing.com/parts/HAL-SLV750/
http://www.summitracing.com/parts/HAL-SLV625/

The sleeve kit worked perfectly on the rear for me. I had to get a sleeve made for the front however.
MOTOWN
11-03-2010, 02:40 PM
thank you very much this helps
burt ragio
11-04-2010, 05:23 AM
Measure bolt lenght & diameter. Why are you considering Naake shocks ?
MOTOWN
11-04-2010, 06:32 AM
Measure bolt lenght & diameter. Why are you considering Naake shocks ?

i want a better handling shock than the factory option, plus im going to widen my rims, and get a set of 305/45 dr
LANDY
11-04-2010, 06:39 AM
Pm cougar9150. He just got done installing his and he molded them to fit correctly.
cougar9150
11-05-2010, 07:19 AM
I just went to my local Alro metal supply. Got some 3/4" steel tubing. I forget what the ID was for the rear. Cut it to the factory width, bevelled the edges, and tubing ID. Then I made my own bushings w/washers and urethane tubing I got from McMaster Carr.

Did the same for the lower mounts on the front.

I'll take pics later today. I was finally able to wrestle the camera away from the wife.