how long is the JLT tube?

[Bradley G]

Can someone tell me how long the tube measures on your JLT intake tube?
how far from the throttle body side of the tube to the breather hole?
I have most of the pieces already from the retune, just need the elbow and the coupler.
The two coupleings that attach the tube to the throttle body and from the tube to the maf.
TIA

[fastblackmerc]

Can someone tell me how long the tube measures on your JLT intake tube?
how far from the throttle body side of the tube to the breather hole?
I have most of the pieces already from the retune, just need the elbow and the coupler.
The two coupleings that attach the tube to the throttle body and from the tube to the maf.
TIA

The tube itself is 10" long. I replaced mine with a 4" diameter black PVC pipe, which I believe is for waste / sewer. Drill a 3/4" hole and thread in the elbow for the cam cover vent.

[Bradley G]

Thanks, How far from the end do I drill the hole?
The tube itself is 10" long. I replaced mine with a 4" diameter black PVC pipe, which I believe is for waste / sewer. Drill a 3/4" hole and thread in the elbow for the cam cover vent.

[massacre]

My zip tube is a lot longer than that......
but then again I have the '99-'01 Cobra-style JLT.

Sorry, I know this probably doesn't help much....lol

[fastblackmerc]

Thanks, How far from the end do I drill the hole?

Don't remember, but you can just use a longer hose if needed. I'd put it about 3 - 4 inches from the end of the top rubber coupling.

[Bradley G]

Thanks I'll do that
Don't remember, but you can just use a longer hose if needed. I'd put it about 3 - 4 inches from the end of the top rubber coupling.