PDA

View Full Version : SS Hose Kits



Todd TCE
12-13-2010, 07:54 AM
If you're still looking for a last minute gift....I have two sets of these on the hook looking for a good home.

Also; please look for some revamping of the TCE kit offerings on the web page shortly!

HOSES (http://www.tceperformanceproducts.com/marauder/kits-17/)

Krytin
12-13-2010, 08:02 AM
Interested to see the "new" offerings - @ 105K miles it may be time for a major brake overhaul - at least that's what I'll tell the wife!!

SGT_MERC
12-13-2010, 11:01 AM
The SS lines will fit my 05 GM, correct?

Mr. Man
12-13-2010, 11:36 AM
If you're still looking for a last minute gift....I have two sets of these on the hook looking for a good home.

Also; please look for some revamping of the TCE kit offerings on the web page shortly!

HOSES (http://www.tceperformanceproducts.com/marauder/kits-17/)
Any hints on what changes are imminent?

Todd TCE
12-13-2010, 12:10 PM
Lines: yes that has been shown to be correct. However I'd advise you proceed with caution on the first of each end to verify length and fittings.

As for the 'changes'...I will be looking at a slightly different front kit design to use the new DP6 caliper rather than the BSL6. Benefits being a bit more cost effective and also hopefully not requiring any wheel spacer.

http://i122.photobucket.com/albums/o269/ToddTCE/Calipers/Dynapro_Six_Lug_Mount-lg.jpg

musclemerc
12-13-2010, 02:19 PM
Bump for a great product and upgrade.

TCE SS lines FTW!

Todd TCE
12-13-2010, 02:30 PM
Thanks.

3 kits on the hook total at this time.

Next run probably not until March or April.

Todd TCE
12-13-2010, 04:28 PM
After looking at the options for production on the proposed DP6 and it's related costs...I don't see it happening. Running the numbers on it there's very little, if any true cost reduction making it a wash.

I had also considered making a W6A kit for the car. The issue here is wheel space. Again.
The W6A is on a 1.25 wide rotor only and available mainly in 14" and larger applications. This combo would push the wheel clearance requirements out about 1/4" more than we are at now meaning a 10mm spacer would be required for the oe rotor. Those kits would then run the same $2100 price point as the Charger, Mustang and Corvette applications.

Todd TCE
12-15-2010, 07:19 AM
Hose kit: TWO REMAIN in stock.

Brake Kits: I have added the W6A kit to the listing for anyone who is truly interested in some serious brake needs. Same parts and pieces (of sort) found on the Corvette, Charger and others.

http://i122.photobucket.com/albums/o269/ToddTCE/Magnum%20Charger%20300C/IMG_1639.jpg

RF Overlord
12-15-2010, 06:39 PM
Todd, are the SS lines for the front only or all four?

Todd TCE
12-15-2010, 07:09 PM
There are options available for both on the web page (http://www.tceperformanceproducts.com/marauder/kits-17/).

fastblackmerc
12-15-2010, 07:21 PM
At a minimum get the SS brake hoses. Once installed they will greatly improve brake pedal feel.

For the ULTIMATE braking experience the TCE brake upgrade is the way to go. Has saved my butt (& MM) more times than I care to admit. Your MM will stop on a dime and give you $0.09 change!

burt ragio
12-17-2010, 07:39 AM
The Marauder oem brake system leaves much to be desired. The day I test drove the car back in 2004 that was my 1st thought of a needed upgrade. I have since installed ss lines & hawk performance pads but the improvements are minimal. I will at some point go with the 13" willwood front brake kit.

Todd TCE
12-17-2010, 07:44 AM
The 13" kit is certainly a step in the right direction. I'd truly like to put folks into some 14" kits more but those pesky wheels you guys like are nothing but trouble!

fastblackmerc
12-17-2010, 07:45 AM
The Marauder oem brake system leaves much to be desired. The day I test drove the car back in 2004 that was my 1st thought of a needed upgrade. I have since installed ss lines & hawk performance pads but the improvements are minimal. I will at some point go with the 13" willwood front brake kit.

You won't be disappointed!

http://i167.photobucket.com/albums/u133/fastblackmerc/MM%20Mods/TCE%20Brake%20Upgrade/Complete2.jpg

Mr. Man
12-17-2010, 05:00 PM
Mission accomplished. Got the order in just now. Thanks!

burt ragio
12-17-2010, 05:42 PM
Very nice Christmas present. Keep use posted on your results.

Ms. Denmark
12-17-2010, 05:57 PM
Very nice Christmas present. Keep use posted on your results.I think so too! But it's actually going to be my birthday present....:coolman:

Todd TCE
12-18-2010, 09:04 PM
One kit left

Ms. Denmark
12-20-2010, 04:29 PM
Delivery has arrived..........!!!!! :bows:Thanks Todd!


Happy Birthday To me!
Happy Birthday to Me!
Happy Brakelines, Happy Brakelines....
FromTCE EEEEEEEEEEEE!

:cake:

SGT_MERC
12-20-2010, 04:56 PM
Just got my SS brake lines, Thank You Todd. I've got a list for the spring that keeps getting longer.

Todd TCE
12-20-2010, 07:06 PM
Thanks everyone.
Final set I have now going to Bob in CA.

Everyone have a great Holiday season....we'll do some more hoses on the Spring I'm sure.

massacre
12-20-2010, 07:09 PM
I got these hoses last year and I was really impressed with the quality.
Truly top notch.