View Full Version : Wanted To Buy need 3 rims...will take all 4 though
joemama
01-07-2011, 07:40 AM
I hit a curb this morning and trashed 3 rims.:( Can anyone help me? :o
Ford wants $1387 each..:depress:.
TiTo35
01-07-2011, 07:53 AM
$1387...for 1 rim?!?! Call them back, I dont think that is right...
MOTOWN
01-07-2011, 07:55 AM
$1387...for 1 rim?!?! Call them back, I dont think that is right...
it is if its the dealer!:eek:
gdsqdcr
01-07-2011, 07:57 AM
Check eBay. You can find sets on there periodically as well.
MOTOWN
01-07-2011, 07:58 AM
i wish some one made a 20" replica! that would be sweet
fastblackmerc
01-07-2011, 08:19 AM
:dunno: How can you hit a curb and trash 3 rims????
Egon Spengler
01-07-2011, 08:35 AM
Man, if you trashed 3 rims hitting a curb, I would check your alignment and rear end. I hit a curb and snapped an axle!
i wish some one made a 20" replica! that would be sweet
That's what she said!
FF1077
01-07-2011, 11:02 AM
:dunno: How can you hit a curb and trash 3 rims????
Dude, not to add insult to injury but I am wondering the same thing. That must have been one hell of a banked shot!
RoyLPita
01-07-2011, 11:03 AM
Where I work, we have the 18" MM style wheels that were for the Mustang. These will fit the MM but the MM center cap will have to be modified to fit.
We have a set of 4.
I am going to find out a price from my boss on these.
Ford wants $1387 each..:depress:.
GOD DAMN!!! :awe:
Dragcity
01-07-2011, 12:09 PM
Oh, I'll take four please, and an MMC drive shaft too...
joemama
01-07-2011, 12:47 PM
:dunno: How can you hit a curb and trash 3 rims????
You hit with one tire at an angle and it will spin you around to make contact with the others...
I am told my rear assy is toast too...axles, pinion, etc. I had FRPP ring gear and pinion in there with 4.10s. It may be time to upgrade to the Moser 31 splines...and a detroit tru locker.
joemama
01-07-2011, 12:47 PM
I already ordered tires and aftermarket wheels from tire rack... will post pics when done.
joemama
01-07-2011, 12:48 PM
also upper and lower a-frame and spindle are bent...:(
No body damage though...:banana2:
Blk Mamba
01-07-2011, 12:53 PM
Where I work, we have the 18" MM style wheels that were for the Mustang. These will fit the MM but the MM center cap will have to be modified to fit.
We have a set of 4.
I am going to find out a price from my boss on these.
Did you get a price?
Egon Spengler
01-07-2011, 01:19 PM
Wow... this sounds similar to my accident! My car went sideways 90* so my right front hit the base of a tree which swung my rear end around and into the curb trashing 2 rims. Also trashed my air ride in the back and an axle and rear end. My car was almost totalled!
TiTo35
01-07-2011, 01:40 PM
Same thing happened to me...I hit a curb and shifted everything in the back to the left...I dont know your situation but I called my insurance and they covered it.
Egon Spengler
01-07-2011, 01:54 PM
Same thing happened to me...I hit a curb and shifted everything in the back to the left...I dont know your situation but I called my insurance and they covered it.
Same happened to me. I have full coverage on mine and I appealed my surcharge for the accident and they cleared me of it because the roads were so bad that they didn't find me at fault.
FF1077
01-07-2011, 09:13 PM
I need to keep my mouth shut.
I hit a huge pot hole on the way home and now I need a new tire.
Hopefully the rim is okay.
Good luck with your repairs.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.