Arm suspension

[yryr999]

Hi

today I buy upper arm both side when I back home i found the parts is not the same on my marauder ... so i call the dealer and he say to me the stock part is diffrent than the replacement part ...

here the picture for the replacement part and part number in attachments



I'm so counfuse some say change it and some say no the stock is bettar

[LANDY]

If I were you I would return those and go with mevotech ones from rockauto, they are forged just like the factory ones.

[thathotrodlincn]

I would not use them

[yryr999]

the problem is I can't order any other parts cause I'm out side USA

[MOTOWN]

i would return the sub-standard arm, and find some one within the u.s. that can get you the correct part if they wont ship to you, i assume your in the middle east.

[Krytin]

Moog has a listing for the cast upper control arms as well.

[RoyLPita]

The part number is correct for your application. I have something like that on my MM. If you have to, tie strap your ABS wiring to the arm.

Did you also get MCSOE-35 or 6W1Z-3084-S too for the right side?

[yryr999]

yes I'm ... why ??

i will change both side ....

[RoyLPita]

Just making sure you got the correct parts. Thanx for the info.

[yryr999]

4most of the expert say those parts is not like the stock one ... cause the stock one batter than the new one ... so what u r advice

[RoyLPita]

Use them. I have over 41k on the same exact parts (numbers and all) that are installed on my MM.

[BigCars4Ever]

I eneded up using the ones like you pictured. They are half the weight and fully boxed so they are pretty stiff. Mine came with all of the correct ABS clips to make the switch for the abs harness too.

[SpartaPerformance]

The difference is that you bought a Ford Motorcraft part and not a Ford part. There is a difference.