PDA

View Full Version : Dash Cluster


James96
02-25-2011, 05:29 PM
Can anyone tell me if a Dash Cluster out of a 03 or 04 would go into my 01 Grand marguis (floor shift).
logix7
02-25-2011, 06:08 PM
it COULD go in to your 01 Grand Marquis. But it wont be plug-n-play
SVT_MERC
02-25-2011, 07:03 PM
It sure can, but if you aren't comfortable with wiring diagrams, and re-pinning & splicing the connectors then you will need to find someone who is. You must wire in a tach adapter so that you have a signal for the tach. You will also need to source an extra connector from a junkyard car to source a few of the extra pins that you will need as well.

If you are comfortable with the wiring aspect of this project, then you will be fine. It requires careful planning ahead of time and a couple hours of your time to complete the actual work. The results are worth the effort. If you have any other questions, feel free to ask.
fastblackmerc
02-26-2011, 04:03 AM
Yes it will fit.....

Some work involved to make it "work".
James96
02-26-2011, 07:51 PM
Thanks to all the above. Anybody in New Jersey that does this type of work ?