what are your 2011 mod plans bud?

[MOTOWN]

thinking of my next move has me wondering what new mods every one has in mind, i plan on a metco watts link, qa1s for the rear, and 4:10s/31 splines:burnout:

what about you bud??:woohoo:

[FordNut]

I would like to upgrade to a 9" rear end.
Replace/upgrade my cats, since I had to hammer & dent mine to fit with the modified crossmember.

[Spectragod]

thinking of my next move has me wondering what new mods every one has in mind, i plan on a metco watts link, qa1s for the rear, and 4:10s/31 splines:burnout:

what about you bud??:woohoo:

Forged stroker from Alternative Auto.....

[Blackened300a]

New bling on the way. ;)

[LANDY]

Put an boost limiter valve and convert to blow thru. Pulley it to 16# and bleed off the boost at 10

[babbage]

Extrude hone lower, evenflow from Renihart, new lines from TCE.

[Pops]

Just a little spray!

[ImpalaSlayer]

finish my truck :laugh:

[illwood]

4.10s, braided stainless brake lines, rotors & pads.

[bosscj72]

1. Bring it in for a on dyno tune. SCT2 I have doesn't pull well in the mid-range (It is like it holds back until 4,300 RPM's is reached).

2. I have the EBC front brakes and slotted drilled rotors and Hawks rear brakes and slotted drilled rotors to install too.

3. Get stainless brake lines (custom made or find somewhere).

4. I have 2.5" Borla SS Mufflers I plan to add to the exhaust later in the year.

5. 4.10's are in and rebuilt rear end so that is set for 100K more! Transmission was rebuilt with all the good components (Alto, enhanced cooling etc...) and CAI K&N installed too.

6. Future: Possibly a Trilogy or another Charger (Eaton etc...). I am also thinking about other exhaust upgrades. Also real functional gauges too. :banana:

[guspech750]

4.10's going in tomorrow.

Sent from my iPhone
Go White Sox!!!

[Mr. Man]

1. Bring it in for a on dyno tune. SCT2 I have doesn't pull well in the mid-range (It is like it holds back until 4,300 RPM's is reached).

2. I have the EBC front brakes and slotted drilled rotors and Hawks rear brakes and slotted drilled rotors to install too.

3. Get stainless brake lines (custom made or find somewhere).

4. I have 2.5" Borla SS Mufflers I plan to add to the exhaust later in the year.

5. 4.10's are in and rebuilt rear end so that is set for 100K more! Transmission was rebuilt with all the good components (Alto, enhanced cooling etc...) and CAI K&N installed too.

6. Future: Possibly a Trilogy or another Charger (Eaton etc...). I am also thinking about other exhaust upgrades. Also real functional gauges too. :banana:
Call Todd at TCE. He has a complete kit.

[Fosters]

4.10s, jlt, tune, and switch out the dry nitrous kit it came with for a wet one, or out completely if there's any interest in people buying it... with how few marauders are around me though, I don't see it happening... :\

[Vostok]

4:10's

Maybe a chin spoiler and S-55 if i'm feelin it.

[Got_1]

get around to installing my FRPP shorties and 4.10 gear.

[risky]

4.10s and a complete 2.5"mid pipe swap With highflow cats. Don't know if I'm going to keep the stock mufflers or flowmasters 40s deltas or the aero turbines

[myrodr]

get all the parts for eaton installed , tuned and enjoy.

[musclemerc]

Install my ported intake, 96 Cobra cams, finish my centri pipe setup, and finally build a true N/A RAI intake setup

[F8LBITEva]

410's, JLT intake and tune. Lately ive been thinking about uncorking the exhaust even though I promised myself I wouldnt make this car louder.

[visionmercury]

im shooting for a stainless works headers back system , and under drive pullys and go from there :)

[FastMerc]

Forged stroker from Alternative Auto.....
Been there done that,my mod for the year... 302 Stroker!

[breeze]

get some drag radials!!!

[fastblackmerc]

Replace all the incandescent bulbs in the instrument cluster with LEDs.

Rebuild 31-spline 8.8 with carbon fiber clutches.

Install said 8.8 with 31-spline Moser axles (swap over the 4.10's).

Polish rear calipers & get them powdercoated red.

Install new rear brake pad, rotors & emergency brake shoes.

Install rear stainless steel brake lines.

Install roll control.

Finish modding foglights (adding H1 HIDs)

Polish spare upper & lower intake & get them powdercoated.

Powdercoat and install intake spacer.

New rear shocks.

J-mod.

High speed balance spare driveshaft & install.

Install hi-flo fuel pump.

Install remote fuel door.

Install triple gauge pod and gauges.

Install grease-able rear sway bar bushings.

[CWright]

Replace all the incandescent bulbs in the instrument cluster with LEDs.

Rebuild 31-spline 8.8 with carbon fiber clutches.

Install said 8.8 with 31-spline Moser axles (swap over the 4.10's).

Polish rear calipers & get them powdercoated red.

Install new rear brake pad, rotors & emergency brake shoes.

Install rear stainless steel brake lines.

Install roll control.

Finish modding foglights (adding H1 HIDs)

Polish spare upper & lower intake & get them powdercoated.

Powdercoat and install intake spacer.

New rear shocks.

J-mod.

High speed balance spare driveshaft & install.

Install hi-flo fuel pump.

Install remote fuel door.

Install triple gauge pod and gauges.

Install grease-able rear sway bar bushings.


NICE!!:beer:

[FW_Linc/Merc]

I am finishing my wish list from 2010. My plans for 2010 were nightshaded taillights and badgeless grille. In 2010 the taillights were completed and in January I got a grille to mod. That grille is out for paint now so it is safe to say it will be installed this year.

I might do the Mach spolier next year. Need to work on the Impala some this year since I am considering taking it on part of the Power Tour.

[illwood]

410's, JLT intake and tune. Lately ive been thinking about uncorking the exhaust even though I promised myself I wouldnt make this car louder.

Being the driver, you don't get to fully appreciate the sound that the Marauder has in stock form.

I brought mine to a local SVT club dyno day and when it was on the rollers and the hammer was down, it sounded amazing.

I like that it is *relatively* quiet when it is called for and can get pretty loud too.

[Fosters]

Being the driver, you don't get to fully appreciate the sound that the Marauder has in stock form.

I brought mine to a local SVT club dyno day and when it was on the rollers and the hammer was down, it sounded amazing.

I like that it is *relatively* quiet when it is called for and can get pretty loud too.

I think I know where he's coming from... Compared to my mach, the marauder is dead quiet. The mach on the other hand, can pretty much wake the dead. I too am on the fence about making this loud.. I like the tone of the exhaust, but it is a nice change (volume wise) from the mustang... But knowing how much weight and power is trapped in the factory exhaust... tempting.

[stryker]

Greetings Marauderers, I start to look for a Panther to adopt and start moddifiyng to destroy and make eat dirt to some or many disgusting sport compacts and some Mustangs. after the tragic lost of my M-Panther.

[tbone]

4.10's going in tomorrow.

Sent from my iPhone
Go White Sox!!!

You reallly need a new roof before 4.10's Joe........:shake: lol

[tbone]

Saving for Trilogy. :beer:

[PurdueRifleman]

Paying it off before I do any more modifications to it.

I know, I'm no fun.

[fastblackmerc]

Replace all the incandescent bulbs in the instrument cluster with LEDs.

Rebuild 31-spline 8.8 with carbon fiber clutches.

Install said 8.8 with 31-spline Moser axles (swap over the 4.10's).

Polish rear calipers & get them powdercoated red.

Install new rear brake pad, rotors & emergency brake shoes.

Install rear stainless steel brake lines.

Install roll control.

Finish modding foglights (adding H1 HIDs)

Polish spare upper & lower intake & get them powdercoated.

Powdercoat and install intake spacer.

New rear shocks.

J-mod.

High speed balance spare driveshaft & install.

Install hi-flo fuel pump.

Install remote fuel door.

Install triple gauge pod and gauges.

Install grease-able rear sway bar bushings.

Forgot to add.........

Install Moog front sway bar end links that just arrived today! :banana2:

[Lignum]

Maybe some exhaust work. Nothing too crazy

[tbone]

Not a performance mod, but I would really like smoked windows sometime soon.

[bolsen]

tints, interior buld replacement, hid fogs, chin spoiler, drain the tranny and replace fluid with RP Max ATF, and the car will be payed off in october and i can really start with the fun stuff... and BC4E dead pedal... and full gods head conversion...

[tbone]

tints, interior buld replacement, hid fogs, chin spoiler, drain the tranny and replace fluid with RP Max ATF, and the car will be payed off in october and i can really start with the fun stuff... and BC4E dead pedal... and full gods head conversion...

Not happy with my GODSHEAD emblems. The front one is pitting and both are showing signs of white corrosion. I just put them on last summer. I'm going to contact Car Motorsports about this.

[MOTOWN]

Forgot to add.........

Install Moog front sway bar end links that just arrived today! :banana2:
can you post weather the stud that goes thru the sway bar is long enuff, after reading some had problems, curious to know your findings

:confused:

[cragantler]

Thanks to motown ^^^^, I get to install some sweet Marauder sway bars on my vic:banana2:
That's in addition to:
ported and polished plenum install
MZT install and SCT tune