programing a remote

[DallasT]

Can anyone redirect me to the instructions on how to program a remote to the marauder ?? THANKS

[ctrlraven]

To program the transmitters yourself:


Insert a key in the ignition and turn from 3(Off) to 4(On) eight times in rapid succession (within 10 seconds) with the eighth turn ending in the 4(On) position.
The doors will lock/unlock to confirm that programming mode has been entered.
Within 20 seconds, program a remote transmitter by pressing any button on a transmitter. The doors will lock/unlock to confirm that the remote transmitter has been programmed. (If more than 20 seconds pass before pressing a remote transmitter button, the programming mode will exit and the procedure will have to be repeated.)
Repeat the previous step to program additional remote transmitters. The doors will lock/unlock to confirm that each remote transmitter has been programmed.
When you have completed programming the remote transmitters, turn the ignition to 3(Off) or wait 20 seconds. Again the doors will lock/unlock to confirm programming has been completed.


You need to do all your remotes back to back. If you're adding in one new remote you will need to do the rest of them as well since they will lose the programming.

[DallasT]

thanks alot im gonna try that

[SpartaPerformance]

You don't have to repeat the entire procedure you can do atleast 2 remotes at the same time.