PDA

View Full Version : Chin spoiler question


ctrlraven
07-20-2011, 05:38 AM
Will it fit a 2005 CV? I think it would, just wanted to make sure. A friend of mine wants to put one on his car and I told him I would confirm it first before he orders one.
fastblackmerc
07-20-2011, 05:53 AM
Yes it will.
ctrlraven
07-20-2011, 06:00 AM
Thank you!
Joe Walsh
07-20-2011, 06:10 AM
Who has the best deal on those MACH I chin spoilers?...any vendors on this site?

Has anyone had any problems with spoilers that were shipped folded in half?
fastblackmerc
07-20-2011, 06:13 AM
Who has the best deal on those MACH I chin spoilers?...any vendors on this site?

Has anyone had any problems with spoilers that were shipped folded in half?

Your best bet might be eBay.

Just let it sit in the sun and if it doesn't melt :eek: it will straighten out.
Joe Walsh
07-20-2011, 06:15 AM
Just let it sit in the sun and if it doesn't melt :-) it will straighten out.

Does this qualify for a TWSS!.....?
Baconbit
07-20-2011, 08:24 AM
americanmuscle.com has them for 74.99 with metal fastening hardware
fastblackmerc
07-20-2011, 08:40 AM
americanmuscle.com has them for 74.99 with metal fastening hardware

I chose to use 1/4" plastic push rivets to install mine and Marauderman's. Much safer if you hit anything with the spoiler, plus your just screwing into plastic... not really anything to bite into.
SGT_MERC
07-20-2011, 01:02 PM
I used the metal fastening hardware with the chin spoiler on my 05 Grand Marquis. The hardware included nuts, bolts and lock washers. Been on for almost 2 yrs with plenty of scrapes on the spoiler with no problems.
Fosters
07-20-2011, 02:15 PM
As a mach1 owner, I would not put that pos on any other car... I've even been tempted to take it off the mach honestly. The thing loves to scrape every time you get out of a parking lot...

Then again, my mach can't even clear a coke can, so that may be part of the problem... :(
fastblackmerc
07-20-2011, 02:23 PM
As a mach1 owner, I would not put that pos on any other car... I've even been tempted to take it off the mach honestly. The thing loves to scrape every time you get out of a parking lot...

Then again, my mach can't even clear a coke can, so that may be part of the problem... :(

You think???? :D
fastblackmerc
07-20-2011, 02:24 PM
I used the metal fastening hardware with the chin spoiler on my 05 Grand Marquis. The hardware included nuts, bolts and lock washers. Been on for almost 2 yrs with plenty of scrapes on the spoiler with no problems.

But your car is a GM.....

Try and find a front bumper cover for a Marauder that doesn't cost you an arm, leg and 2 kids!