Digital Torque Wrench Special

[blmw]

http://www.brownlinemetalworks.com/images/wrench.jpg

Re-running this special for the upcoming Holiday Season (until Dec. 31st). Our Digital Torque Wrench makes a great gift, so don't miss out!!

As a new sponsor of this forum, we are offering an introductory special: our Digital Torque Wrench w/ Blow Molded Case for $99 - including shipping. Just go to our website: Brown Line Metalworks, LLC | Professional Grade Digital Torque Wrench and click on the "Buy Now" button. At checkout, enter the coupon code: MM

You can see the torque wrench in action in the following video:

cEJsE2vlxxE

Product Specifications

Patented Double Gear Sensing System
Designed, engineered, and tested by Brown Line Metal Works, the patented* D.G.S.S. technology ensures repeatable accuracy of +/- 3.5% both clockwise & counter-clockwise
Accurate from 20 – 100% of full scale (7% accuracy from 10 – 20% of full scale)

Microprocessor Controlled
8-bit electronics ensures accurate readings and simplicity of use
Allows for both Peak and Track mode
Individually calibrates each wrench
Supplies unique serial number for each wrench

Ratchet Head
1/2" drive reversible ratchet
32-tooth gear provides an 11.25º arc while handling high torque loads
Forged from Chromium Vanadium alloy to ensure strength
Conforms to ASME B107.10 2005 standards

Range
15 – 150 ft/lbs
180 – 1,800 in/lbs
20.3 – 203 Nm

Digital Control
Large backlit digital display shows both target torque and current read-out
Intuitive button design makes operating torque wrench simple
LEDs and digital display provide visual feedback when operating wrench
Buzzer creates audible feedback when target torque is reached
Easily switch between ft/lbs, in/lbs, and Nm
Automatically powers off when not in use for 2 minutes
Low battery indicator

Handle
Soft-touch overmold provides comfortable non-slip grip
Engineered plastics ensure an impact resistant housing


The offer is valid till Sept 21st, and is only for the lower 48 states. (Active again until Dec. 31st)

[massacre]

I love the fact that it has a good range 15 - 150 lb/ft.
And, it can switch between lb/in and lb/ft? That is definitely a plus....

What type of warranty are you offering on this tool?

-thanks.

[blmw]

I love the fact that it has a good range 15 - 150 lb/ft.
And, it can switch between lb/in and lb/ft? That is definitely a plus....

What type of warranty are you offering on this tool?

-thanks.

Our warranty is industry standard: 1 year from date of purchase, 90 days for calibration. Our repair / calibration facility is located in Chicago in case anything ever does need to be done to the wrench.

BLMW

[Black&Gifted]

On my list of tools to think heavily about.

[TAKEDOWN]

Welcome and wher in Chicago are ya from?

[JoeBoomz]

The offer is valid till Sept 21st, and is only for the lower 48 states.


Is the wrench too high-tech for Canada? I'm getting tired of using beavers to test the torque on my lug nuts. ;)

[Blackened300a]

Awesome tool. Expect a order from me in the very near future.

[tjl006]

You offer any wrenchs with a torque angle feature for tty bolts?

[ImpalaSlayer]

You offer any wrenchs with a torque angle feature for tty bolts?

can you explain Tom>?

[tjl006]

Some torque wrenchs have a feature that the can measure how many degrees a bolt is being tightened this comes in handy when installing torque to yield fasteners. A tty bolt for example may have to be tightened to 30ftlbs then and aditional 90 degrees.

[ImpalaSlayer]

Some torque wrenchs have a feature that the can measure how many degrees a bolt is being tightened this comes in handy when installing torque to yield fasteners. A tty bolt for example may have to be tightened to 30ftlbs then and aditional 90 degrees.

ohh ok yeah i got you now.

[FreddieH]

Ordered mine today.

[bhenderson]

Great looking wrench. I will be ordering one.

[blmw]

Welcome and wher in Chicago are ya from?

Thanks for the welcome. We are located a few minutes northwest of Wrigley Field (in the Ravenswood area).

BLMW

[blmw]

Is the wrench too high-tech for Canada? I'm getting tired of using beavers to test the torque on my lug nuts. ;)

We certainly didn't mean to leave any Canadians out of the mix. Unfortunately, shipping to Canada is a lot more than shipping within the US, so the $99 special doesn't work. Why don't you PM me and I will let you know the extra shipping cost to Canada, and you can then let me know if it makes sense for you.

BLMW

[blmw]

You offer any wrenchs with a torque angle feature for tty bolts?

We do not currently offer this feature, but it is something that we are working on and it should be available mid-next year.

BLMW

[blmw]

Just wanted to thank everyone for the the orders and the support.

[B.C. Bake]

Ordered mine today and am looking foreword to using it...:D Thanks BLMW

for still offering the deal today, I saw this a little late........:burnout:

[MyBlackBeasts]

Just wanted to thank everyone for the the orders and the support.

I bought one when you 1st posted. Will be using it to install #242 soon! Yah, baby! :D

Curious, how many have you sold to MM.net post-o-adicts??? :burnout:

[blmw]

I bought one when you 1st posted. Will be using it to install #242 soon! Yah, baby! :D

Curious, how many have you sold to MM.net post-o-adicts??? :burnout:

Off the top of my head, we have probably sold about 15 wrenches. We have really appreciated the support!

BLMW

[Pat]

I just ordered the wrench, but did not see the MM coupon code anywhere in the process. I paid $140.00.

Did the introductory offer expire?

[justbob]

Do you carry any wrenches that go up to 250 Foot pounds?

This was posted live, in real time.

[Pat]

Jimmy from BMW responded to me in an e-mail. He said the coupon code was linked to the wrench with case version. But he will reimburse me the difference.

Thanks Jimmy and BMW.

Regards,

Pat

[Pat]

My new torque wrench arrived last night. It's a beautiful instrument and large enough to tightened everything that needs torquing above 15 ft lbs on our cars.

[blmw]

We updated the initial post, but wanted everyone to know that the special is active again for the upcoming Holidays (until Dec. 31st). It makes a great gift. Let us know if you have any questions.

BLMW

[REAL4WD]

Thanks for extending the offer! I just placed my order!

[blmw]

You know what makes a great gift? A digital torque wrench!

[Haggis]

You know what makes a great gift? A digital torque wrench!

Thank you, but you ruined the surprise.

[Mercguy04]

You can always ship it as a gift.
I know I sent things to Germany as gift. No trouble.
Of course that was a few years ago.
I had also heard that if it wasn't completely assumbled it came in as parts.
Just some thoughts on the subject.

[1 Bad Merc]

Just bought two -thank you!!!!!!

[Mr. Man]

Ordered wrench w/ case today.

[Ladyhawke]

Ordered wrench w/ case today.

Thank you Eric, but I did not get you anything....Yet.

[Mr. Man]

Thank you Eric, but I did not get you anything....Yet.
My ears are burning so I know your thinking.:lol:

[Mercguy04]

PM Sent
Thanks

[blmw]

We have gotten a lot of requests, so we are going to reactivate the MM code and keep it open for the time being.

Thanks for the support.

BLMW

[blmw]

Don't miss out on a great torque wrench!!

[SGT_MERC]

Just ordered mine. Will be using it quite a bit in 2 weeks.

[blmw]

Just ordered mine. Will be using it quite a bit in 2 weeks.

Thanks for the order.

[Blackened300a]

This is a great wrench, I've used it several times on my job and its very accurate and easy to use.

[Hadamustang1]

Thanks for the great deal.. I don't even know when I will use this..But I;) wanted one anyway

[GetMeMyStogie]

Our repair / calibration facility is located in Chicago in case...

Can the wrench be re-calibrated anywhere (that recalibrates tool), or does it have to be sent to BLMW for recalibration?

Crossing the border for tool repair isn't exactly ideal for me.

[blmw]

Can the wrench be re-calibrated anywhere (that recalibrates tool), or does it have to be sent to BLMW for recalibration?

Crossing the border for tool repair isn't exactly ideal for me.

Unfortunately, at this point in time we are the only ones who re-calibrate them.

BLMW

[SGT_MERC]

Just received mine yesterday and it's a work of art. Can't wait to use it. Thank You Brown Line Metal Works.

[blmw]

Get yourself a great torque wrench !!

[blmw]

Don't miss out on the chance to get a great torque wrench.

[Mike M]

Just ordered mine.

Thanks

[blmw]

Just ordered mine.

Thanks

No problem. Thanks for the order!

[blmw]

Need a great Father's Day gift? Well here you go!

[blmw]

Just a reminder in case you need a great torque wrench.

[blmw]

Need a torque wrench? Well here you go!!

[Mike M]

We use it every day at my shop, very nice piece!

[blmw]

We use it every day at my shop, very nice piece!

Thanks for the nice post.

BLMW

[HorneDogg]

Just ordered mine and once i finish my head job on my Marauder i will be able to get to some meets, if this wrench is everything it says it is then i will let everyone of my shade tree mechanic to car club friends know how well it worked for me and hopefully get you some purchases. does it come with any stickers that i can put up in my shop and on my display board for car shows? THANKS! i look forward to using this wrench!

[blmw]

Just ordered mine and once i finish my head job on my Marauder i will be able to get to some meets, if this wrench is everything it says it is then i will let everyone of my shade tree mechanic to car club friends know how well it worked for me and hopefully get you some purchases. does it come with any stickers that i can put up in my shop and on my display board for car shows? THANKS! i look forward to using this wrench!


Thanks for the order! We don't currently have any stickers or anything like that, but we are working on expanding our line so it is something I will look into.

Feel free to contact me anytime at info@brownlinemetalworks.com with any feedback you might have in regards to the wrench.

BLMW

[Hadamustang1]

I bought one and I don't even know why.. haven't used it yet.. But it looks cool in my tool box.. LOL

[blmw]

Grab one while you can!!

[blmw]

Bump for a really cool torque wrench!

[blmw]

Don't miss out on a great torque wrench.

[blmw]

Need a torque wrench? Well here you go!

[blmw]

Just a reminder in case you need a torque wrench!

[blmw]

Grab one while you can!!!!

[blmw]

Just a reminder in case you need a torque wrench!

[blmw]

Bump for a great torque wrench!!

[blmw]

Get yourself an awesome torque wrench!

[blmw]

It is never too early to start thinking about Holiday Gifts. And our torque wrench makes a great one!!

[blmw]

Get yourself a great wrench for the Holidays!

[blmw]

Need a Holiday Gift? Well here you go!!

[blmw]

Holidays are coming quick - and our torque wrench makes a great gift!!

[License2Bill]

I could definitely use one of these! Going on my Xmas list

[jsignorelli]

I purchased one of these Brown wrenches last Christmas. It was the best tool purchase. It runs rings around my Craftsman digi-torque wrenches. I am buying another this year for my son..."Merry Christmas"

[blmw]

I purchased one of these Brown wrenches last Christmas. It was the best tool purchase. It runs rings around my Craftsman digi-torque wrenches. I am buying another this year for my son..."Merry Christmas"

Thanks! We appreciate hearing things like that.

BLMW

[blmw]

Black Friday is here! Get your self a great gift and buy a torque wrench!

[blmw]

Looking for a great torque wrench (and a great gift)? Well you found it!!

[blmw]

Time is wasting! Holidays are almost here. Get a torque wrench.

[blmw]

Get yourself a great wrench!

[blmw]

Its not too late to get a great Holiday gift!

[blmw]

You won't regret getting a great torque wrench.

[Joe Walsh]

My Craftsman DigiTork Torque Wrench finally expired after 31 years!
(Bought that sucker in '81!)
Sears pulled their:..."The Craftsman lifetime guaranty is only for hand tools and wrenches....*NOT torque wrenches!" B.S. on me so......
I told Marianne that I wanted the Brownline Torque Wrench for $99 including shipping.
She went online and put in the 'MM' code for the discount and we received the Torque Wrench a few weeks ago.

IT is a SWEET, quality tool!

Only problem is that I have to wait for Christmas to use it!......:(

I will report back next week once I get my greedy hands on it!

Thanks Brownline!

*I know for a fact that when I bought that Craftsman DigiTork Wrench, Sears had a lifetime guaranty on it.

[Mr. Man]

My Craftsman DigiTork Torque Wrench finally expired after 31 years!
(Bought that sucker in '81!)
Sears pulled their:..."The Craftsman lifetime guaranty is only for hand tools and wrenches....*NOT torque wrenches!" B.S. on me so......
I told Marianne that I wanted the Brownline Torque Wrench for $99 including shipping.
She went online and put in the 'MM' code for the discount and we received the Torque Wrench a few weeks ago.

IT is a SWEET, quality tool!

Only problem is that I have to wait for Christmas to use it!......:(

I will report back next week once I get my greedy hands on it!

Thanks Brownline!

*I know for a fact that when I bought that Craftsman DigiTork Wrench, Sears had a lifetime guaranty on it.
Sears used to do that to me all the time with tape rulers. I snapped two or three a year. They finally said only the yellow ones or was it the red ones were guaranteed for life. which ever color it was it became impossible to find that color anymore. They did the same thing with aviation snips as I used to go through a pair a year. I don't buy my tools there anymore, no guarantee no patronage.:)

[Joe Walsh]

Sears used to do that to me all the time with tape rulers. I snapped two or three a year. They finally said only the yellow ones or was it the red ones were guaranteed for life. which ever color it was it became impossible to find that color anymore. They did the same thing with aviation snips as I used to go through a pair a year. I don't buy my tools there anymore, no guarantee no patronage.:)

OK... now I'm curious....why are you tearing up so many tape measures and tin snips....?

:D

[Mr. Man]

OK... now I'm curious....why are you tearing up so many tape measures and tin snips....?

:D
Takes a lot of time and effort to make a Frankenstein monster:rolleyes::lol:

Seriously I was a general carpenter for most of my adult life and tape measures routinely snap somewhere between the tip and the 18" mark. Must have gone thru a 100 or so in the 25 years. Snips are used for flashing work and cutting things they weren't designed to cut but were handy at the time. Must have gone thru a dozen hammers as well. Sears always honored the warranty on the hammers.

[Joe Walsh]

takes a lot of time and effort to make a frankenstein monster:rolleyes::lol:

Seriously i was a general carpenter for most of my adult life and tape measures routinely snap somewhere between the tip and the 18" mark. Must have gone thru a 100 or so in the 25 years.
Snips are used for flashing work and cutting things they weren't designed to cut but were handy at the time.
Must have gone thru a dozen hammers as well. Sears always honored the warranty on the hammers.

"Ouch.....!!!"

[Mr. Man]

"Ouch.....!!!"
Maybe I was a mohel in another life :lol:

[blmw]

Have some extra holiday cash? Well, get a torque wrench!

[wchain]

Have some extra holiday cash? Well, get a torque wrench!

Thanks, I just did! :beer:

[MM2004]

Thanks, I just did! :beer:

Wes!

How you doin' man?!

Hope you stop by more often!

Mike.

[wchain]

Wes!

How you doin' man?!

Hope you stop by more often!

Mike.

heh, hey Mike! I'm around, glad to see a few peeps still here!

[ctrlraven]

How often should these be re-calibrated?

I will probably be ordering one in the next two weeks.

[blmw]

How often should these be re-calibrated?

I will probably be ordering one in the next two weeks.

We would recommend around 3K uses. We re-calibrate them in Chicago.

BLMW

[bhenderson]

Great tool. I used mine just last weekend.

[blmw]

Get yourself a great torque wrench!

[blmw]

Just wanted to let everyone know that we have a new product that we are just introducing: Digital Angle Gauge (http://brownlinemetalworks.com/angle-gauge.php)

As you can see, it is a small Digital Angle Gauge that attaches to any ratchet or breaker bar and measures angular rotation for Torque-to-Yield / Torque Turn applications.

Also, we still have the $99 special on our Digital Torque Wrench if you are interested.

BLMW

[vtwoodsman]

Just bought the Brown Line digital torque wrench on-line. After checking around the local tool stores for function/price comparisons, the Brown Line is very competitive.

We'll see how it does on my pending brake job.

[crownvic05]

Went to there website and no where did I get the option to enter the MM to receive the great deal of free shipping for $99 with case.

[ctrlraven]

Went to there website and no where did I get the option to enter the MM to receive the great deal of free shipping for $99 with case.
Under the Torque Wrench select the one you want (Wrench with Blow Molded Case) and then click on ADD TO CART. Once you are at the CART enter MM in the box next to "Discount Code" and hit enter or it should auto update with the new price and all.