PDA

View Full Version : SPC camber bolts


Comin' in Hot
09-06-2011, 09:56 PM
Has anyone ever used SPC camber bolts to fix camber issues on lowered cars? (there is a video in the link below)

http://spc-tv.com/install/pass-car/84-87365-crown-victoria-grand-marquis-town-car.html
RubberCtyRauder
09-07-2011, 06:50 AM
Mine is not lowered, but I have them on my Marauder
screamn
09-07-2011, 09:11 AM
I placed an order for them.

+1 on my car not being lowered.

Gotta get Carfixers alignment specs & mine is maxed out per alignment shop I went to.

Hopefully this will solve the issue and the excessive inner tire wear.
BigCars4Ever
09-10-2011, 04:59 PM
It's a lot of work to install these. I did the K member filing to max out my stock adjusters and it was a pia.
Comin' in Hot
09-10-2011, 06:58 PM
It's a lot of work to install these. I did the K member filing to max out my stock adjusters and it was a pia.

I figure its going to be, especially since I don't have a lift.
Spectragod
09-10-2011, 06:58 PM
Watching the install video, that looks like a lot of fun.............:rolleyes:
Comin' in Hot
09-17-2011, 07:39 AM
The camber bolts are going in today, I expect alot of four letter words until I'm finished
screamn
09-17-2011, 10:24 PM
The camber bolts are going in today, I expect alot of four letter words until I'm finished

So how was the install?

Was it a PIA with the four letter word over & over?

I got mine but I going to have my mechanic friend do the install.
Comin' in Hot
09-23-2011, 03:58 PM
About an hour after my last post I got a call from work to go to Eugene, Oregon. I left almost right away and didn't have a chance to install the bolts. I plan on doing them tomorrow morning.
BigCars4Ever
09-23-2011, 05:13 PM
I wish I knew that the studs came out of the k-member for the rack like that. That would have made it much easier!
blackhueys
09-24-2011, 03:29 PM
why not just cut the flags of the stock bolts?
Comin' in Hot
09-24-2011, 04:50 PM
why not just cut the flags of the stock bolts?

This was already done, the slots in the frame were not long enough.

I did the install today, it wasn't a bad job, about 4 hours with the car on jackstands. It took me a while because I decided to hand file the slots for better control of the holes I was making. Some might think I'm nuts for doing it this way, I call it love for my Marauder.