Cv vs mm

[Guittard22]

I Have a set-up kit for a Crown victoria it's an AED supercharger for 1999-2002 crown vic's with that bolt on supercharger would it be better than a stock MM 2003-2004 ???

[MM03MOK]

Stock Marauder is about 240 HP at the rear wheel (302 at the flywheel - advertised). Please tell us what the CV is stock and what the AED supercharger adds to the HP. How much boost? Knowing there's a very wide range of added horsepower depending on boost and other options for the Marauder, it's hard to give you an answer without more details. Marauder is a 4 valve.

[Joe Walsh]

Possibly....depends on how much boost it makes and how much RWHP it lays down.

Stock Marauder is a low to mid 15 second car.
Stock Crown Vic is a low to mid 16 second car.

I'd go with the Marauder anyway....it's a much cooler car!.....:D

[Bradley G]

An AED enhanced 2V would be considerablely quicker than a stock Marauder.

[Guittard22]

The kit adds about 100 hp to the motor i was thinking about putiing on my police inter. Cv but it has 100k on so I still have the kit .

[Guittard22]

Not sure about boost I ask around

[WI Fordguy]

Yes it would be quicker compared to a stock MM. I had an AED kit years ago, nice setup. My kit had 5 or 6 lbs of boost, but like I said this was awhile ago.

[Guittard22]

do you still have the car it was on? i got my kit for 1000 when aed went under

[johnnyrauder]

i love my mm but lets face it a v6 accord is faster than a stocker

[DOOM]

An AED enhanced 2V would be considerablely quicker than a stock Marauder.

What he said!

[LANDY]

Don't waste your time.on that blower unless your getting the kit for less than a grand.
It will make the CV a high 13 sec car but that's your ending point.
It's a lot cheaper to slap on a 125 shot, gears and stall. At the end of the day you will be fatser .

[babbage]

Don't waste your time.on that blower unless your getting the kit for less than a grand.
It will make the CV a high 13 sec car but that's your ending point.
It's a lot cheaper to slap on a 125 shot, gears and stall. At the end of the day you will be fatser .

No way will an AED make a 13 sec 2v panther. I raced and beat a mint 2v with AED, longtubes and dynotune at a STAP meet best he ran was 14.4 -- I was N/A

[LANDY]

No way will an AED make a 13 sec 2v panther. I raced and beat a mint 2v with AED, longtubes and dynotune at a STAP meet best he ran was 14.4 -- I was N/A
that's even sadder, well the one I saw at the Track ran 13.9 at 100mph.
It had gears and longtubes also.

[RF Overlord]

IIRC AED sold 2 kits, one was 6 lbs boost, the other was 9. If you have the 6 lb kit, go ahead and install it...unless your car was really abused and is on its last legs, it should be able to handle 6 lbs easily.

[Guittard22]

working on the vic this weekend

PI headswap on a NPI block the compression ratio raises and high compression and boost doesn't always mix well.

PI headswap , the PI heads with cams, PI cam sprockets, PI headgaskets, headbolts PI coolant tube, PI coolant nipple , fuel pump, injectors, MAF, computer tune, torque converter and flexplate. The PI and Marauder torque converters are a smaller diameter unit so i can rev it up to 6500 and use the newfound airflow mm box

[DOOM]

This kit will fit a 01 and an 05???

[Guittard22]

This kit will fit a 01 and an 05???

Billy would be the guy to ask but i have not seen him on in a few weeks. But the install says 1999-2002 crown vic's



http://www.crownvic.net/drock96marquis/pdfs/98-02CrownVictoria.pdf

[SC Cheesehead]

Billy would be the guy to ask but i have not seen him on in a few weeks. But the install says 1999-2002 crown vic's



http://www.crownvic.net/drock96marquis/pdfs/98-02CrownVictoria.pdf

:confused: If the install sez 1999-2002, how's it gonna work on a 2003-2005? :dunno:

[Guittard22]

:confused: If the install sez 1999-2002, how's it gonna work on a 2003-2005? :dunno:





WITH THE CASH IT CAN BE DONE :beer:

[DOOM]

Billy would be the guy to ask but i have not seen him on in a few weeks. But the install says 1999-2002 crown vic's

YOU said 01 - 05!


:confused: If the install sez 1999-2002, how's it gonna work on a 2003-2005? :dunno:

That's why I asked Rex! Because I had an 01 CVPI and now have a 05 CVPI!

I guess no one else caught that! :rolleyes:

So why would you say its for an 05 when clearly its NOT!!!

[SC Cheesehead]

YOU said 01 - 05!



That's why I asked Rex! Because I had an 01 CVPI and now have a 05 CVPI!

I guess no one else caught that! :rolleyes:

So why would you say its for an 05 when clearly its NOT!!!

Didn't you read, Doomie, it'll work if you have $$$. :rolleyes:

[DOOM]

WITH THE CASH IT CAN BE DONE :beer: :shake: :shake:



Didn't you read, Doomie, it'll work if you have $$$. :rolleyes:


Hey Rex that's like me saying I have TRILOGY KIT for sale for a 99 crown vic!

[Guittard22]

YOU said 01 - 05!



That's why I asked Rex! Because I had an 01 CVPI and now have a 05 CVPI!

I guess no one else caught that! :rolleyes:

So why would you say its for an 05 when clearly its NOT!!!



sorry had the years wrong in the first post , cv.net members have this kit on later years and younger years :) my kit is still for sale :burnout:

[blazen71]

retard^^^^^^^^^^^^^

[SC Cheesehead]

:shake: :shake:





Hey Rex that's like me saying I have TRILOGY KIT for sale for a 99 crown vic!

You do!??!!@ :eek:

Will that kit fit on an '03 or '04 MM? :confused: I'm so confused...:shake:

[cheetahjab]

You do!??!!@ :eek:

Will that kit fit on an '03 or '04 MM? :confused: I'm so confused...:shake:

No that kit's designed for a 2v 4.6 it will not fit on a 4V motor

[SC Cheesehead]

No that kit's designed for a 2v 4.6 it will not fit on a 4V motor

Ummmm, never mind... ;)

[massacre]

Billy would be the guy to ask but i have not seen him on in a few weeks. But the install says 1999-2002 crown vic's


Billy?

Billy Bishop?

WTF does he know about superchargers?

-no offense.

[05crownsport]

sorry had the years wrong in the first post , cv.net members have this kit on later years and younger years :) my kit is still for sale :burnout:

I will give you 425.00 cash money for it! Yes, I know it's not supposed to fit an 05...but I can do it!

[DOOM]

You do!??!!@ :eek:

Will that kit fit on an '03 or '04 MM? :confused: I'm so confused...:shake:

It's also a direct fit for a 94-96 impala SS! :2thumbs:

[ImpalaSlayer]

this guy is the new bazzle bear.

[SC Cheesehead]

this guy is the new bazzle bear.

Not quite, at least da' Bazzle had a MM... ;)

[DOOM]

Not quite, at least da' Bazzle had a MM... ;)

With the CORRECT blower!!! :D


Oh snap!!!!!!

[PonyUP]

this guy is the new bazzle bear.

Oh damn, a replacement for Bazzle? Frickin awesome, we needed that


Pony seal of Approval

[justbob]

Billy?

Billy Bishop?

WTF does he know about superchargers?

-no offense.

Maybe Billy Mays? He hasn't been on in awile because he's dead.

[SC Cheesehead]

Maybe Billy Mays? He hasn't been on in awile because he's dead.

Yeah, but there was a guy that knew how to sell. Heck, he'd get you to buy a blower made for '99 car for your '05, along with a year's supply of OxyClean...

[DOOM]

Yeah, but there was a guy that knew how to sell. Heck, he'd get you to buy a blower made for '99 car for your '05, along with a year's supply of OxyClean...

:lol: :laugh:

[massacre]

All kidding aside, I might be interested in the blower for another build I'm thinking about.

[PonyUP]

Yeah, but there was a guy that knew how to sell. Heck, he'd get you to buy a blower made for '99 car for your '05, along with a year's supply of OxyClean...

Plus the dent buster


Pony seal of Approval

[Guittard22]

All kidding aside, I might be interested in the blower for another build I'm thinking about.



Here is the form if your really looking at it.


http://www.mercurymarauder.net/forums/showthread.php?t=75426