PDA

View Full Version : programming moonroof



getmykicksina66
12-17-2011, 06:45 AM
Hello, does anyone know if you can somehow program the moonroof to one touch close. I used to be able to press and hold the button for a second or two and it would shut to the proper closed position. I checked the manual and forum but have found nothing about this.Any help would be appreciated .............................. .............................. .......................
Thanks...Ed
04 Silver Birch

fastblackmerc
12-17-2011, 07:29 AM
Hello, does anyone know if you can somehow program the moonroof to one touch close. I used to be able to press and hold the button for a second or two and it would shut to the proper closed position. I checked the manual and forum but have found nothing about this.Any help would be appreciated .............................. .............................. .......................
Thanks...Ed
04 Silver Birch
Only one-touch open... no one-touch close.

From the 2003 & 2004 Owners Manual:

MOON ROOF (IF EQUIPPED)
To open the moon roof:

Press and hold the control forward to raise the moon roof to
the vent position (when the glass panel is closed).
For one-touch operation, press and release the rear portion of
the control; this will fully open the moon roof.
To stop one-touch operation at the desired position, press and
release the forward portion of the control.

To close the moon roof:
Press and hold the front portion of the control.