opitma top and side mounts be used same time

[marauder410]

i got a optima yellow top battery and want to do the big 3 upgrade with my wires and put digital terminals and and was wondering can i use both top and side mounts at the same time

i ask bec the stinger digital terminals im using only have 2 inputs on each one and the groubd only need 2 but the positive gonna need 4 so would need to use the top and side post if possible

one for power to alternaotr
one from power to starter
one from power to fuse box
and one from power to system which isalready ran with 0 guage

im rnning 2 guage red wire i already have got 25 foot hope that this is enough to run these 5 wires, please tell me if i can use both terminals at same time top and side

[Baconbit]

Yes you can with no problems....

[marauder410]

ok so yes i can use both top and side mounts at the same time without a problem im gonna run 2 wires on the top mount and 2 on the side mount

[marauder410]

any second opinions pleaseee

[NATEHAWK]

Your fine man. Get errrr done.

[marauder410]

ok awesome ok some parts on way just ordered off ebay

2 stinger digital positive battery terminals one for top post and one for side post

2 neagtive stinger battery terminal one of each post not gonna need to use the side post but just in case and make look better

25 foot 2 guage red wire to match some red stuff on car to run 5 wires for the big 3 upgrade for my audio system

pair kicker side mount battery post

5 stinfer 0-guage ring terminals one for each wiure need to run for a nice clean install and make sure they dont come loose, i like better than the ones you just crimp. with these you kno wire not gonna gome loose and be done right and clean the first time around

ALL PARTS ON THE WAY I LOVE EBAY CANT WAIT FOR THEM TO ARRIVE THIS IS MY FINSIHING TOUCHES TO MY AUDIO TO GET MAX POWER

GET ERR DONEEE

http://www.ebay.com/itm/400211390677?ssPageName=STRK:M EWAX:IT&_trksid=p3984.m1423.l2649

http://www.ebay.com/itm/400268099754?ssPageName=STRK:M EWAX:IT&_trksid=p3984.m1423.l2649

http://www.ebay.com/itm/290662198413?ssPageName=STRK:M EWAX:IT&_trksid=p3984.m1423.l2649

http://www.ebay.com/itm/310225100356?ssPageName=STRK:M EWAX:IT&_trksid=p3984.m1423.l2649

[2,4shofast]

You can use them both as others have said, make sure to post pics....Im redoing mine in the spring the same way...:beer:

[marauder410]

I sure will post pics soon as done i ordered all the parts and material need to get the job done so soon as items in my hand will get er done and post pics after im excited for this one since its not very hard and all right there in front of you should go nice and smooth easy mod

[MOTOWN]

sounds like you may want to look at a power distribution block http://www.ebay.com/itm/130625997040?ssPageName=STRK:M EWNX:IT&_trksid=p3984.m1497.l2648

[marauder410]

yea instead of using both post i could use one of these but id rather use both post to hide the wires at litle bit and the only thing with this is the outpus are only 4guage or 8 im using 2guage dont think they will fit



sounds like you may want to look at a power distribution block http://www.ebay.com/itm/130625997040?ssPageName=STRK:M EWNX:IT&_trksid=p3984.m1497.l2648