PDA

View Full Version : Remotes


Panther
05-07-2012, 01:05 PM
Anyone knows we're to buy a factory remote I have one but would like two this is the part number. 315MHZ4KLUXNO-SW 4 button remote


---
I am here: http://tapatalk.com/map.php?wwxomx
Sent from my iPhone using Tapatalk Panther
PONY1970
05-07-2012, 01:16 PM
I bought mine from Ebay. You need to buy two new ones in order to reprogram them since the old one will not work after the reprograming.

PONY1970
Panther
05-07-2012, 01:36 PM
Oh ok I will start looking on eBay. Thanks.


---
I am here: http://tapatalk.com/map.php?buwhfb
Sent from my iPhone using Tapatalk Panther
SpartaPerformance
05-07-2012, 02:03 PM
I bought mine from Ebay. You need to buy two new ones in order to reprogram them since the old one will not work after the reprograming.

PONY1970

Not true, you have to program both at same time.
Jolly Roger
05-07-2012, 06:52 PM
Oh ok I will start looking on eBay. Thanks.


Make sure you get the right color.
Panther
05-07-2012, 07:05 PM
The color I have now is gray. So I would have to get the gray factory one only? 4 button.


---
I am here: http://tapatalk.com/map.php?ykrw42
Sent from my iPhone using Tapatalk Panther
Jolly Roger
05-07-2012, 10:07 PM
The color I have now is gray. So I would have to get the gray factory one only? 4 button.

Correct,
but make sure that you check all the ads before you bid or buy to make sure that you get the best price.
Some vendors are selling 2 for what others are asking for 1.
And some of the vendors will have a place to plug in your car info to make sure the remote that they are selling is compatible with your MM.

Good luck.

---
Mike M
05-07-2012, 10:33 PM
I just bought 2 of these last month since i lost both of mine...took about 20 seconds to program, work perfect.
http://www.ebay.com/itm/110856145740?ssPageName=STRK:M EWNX:IT&_trksid=p3984.m1439.l2649
Odinson
05-13-2012, 12:39 PM
Thanks for the tip on the ebay seller. Remotes were clearly used, (as stated) but in good shape. The procedure (the keypad one) he sent me didn't work. Looked it up. There is another proceedure. Turn the key on an off ending in off postion within 4 seconds. Locks will lock and unlock to salute you and start programming mode.

Now in 7 or 20 seconds (depending who you ask) press any button on the remote, then the next, then the next, and so on. Then just turn the key to off. You should have all remotes handy to participate.

It's annoying and finicky with the timing. Expect to try several times before you get the salute.

My 2 new and one original remotes now work.

Thanks!
Mike M
05-13-2012, 02:27 PM
That's weird, mine were brand new. Had to turn key off and on a few times to program.