PDA

View Full Version : Wanted To Buy Metco Valve Breather Adapter


bolsen
05-08-2012, 06:48 PM
I was sold a Metco Valve Cover Breather from a member here (will not name) who I feel tricked me. He sold it to me without the adapter. It may be my fault for failing to clarify.

The point is, I now need a Metco Valve Breather Adapter. New, they cost around $50. I'm hoping someone has a used one for cheaper.
fastblackmerc
05-08-2012, 07:22 PM
I was sold a Metco Valve Cover Breather from a member here (will not name) who I feel tricked me. He sold it to me without the adapter. It may be my fault for failing to clarify.

The point is, I now need a Metco Valve Breather Adapter. New, they cost around $50. I'm hoping someone has a used one for cheaper.

Good luck, most people that have them are using them.
bolsen
05-08-2012, 07:36 PM
I know. I just figured someone may have taken theirs off when/if they purchased an Aluminator as they already have a breather.
99SVT
05-08-2012, 07:50 PM
I know. I just figured someone may have taken theirs off when/if they purchased an Aluminator as they already have a breather.

The aluminator doesn't come with with breathers, it just has a couple rubber grommets with plastic plugs to keep dirt out for shipping. You have to reuse your own pcv system.

Good luck finding one.

Sent from my LT15a using Tapatalk 2
MOTOWN
05-08-2012, 07:55 PM
If your going to pay $50 bucks then get the breather, and the adapter! http://www.ebay.com/itm/Metco-MBR0013-2003-2004-Mustang-Valve-Cover-Breather-/120886427231?pt=Motors_Car_Tru ck_Parts_Accessories&vxp=mtr&hash=item1c25647e5f
DOOM
05-08-2012, 08:06 PM
If your going to pay $50 bucks then get the breather, and the adapter! http://www.ebay.com/itm/Metco-MBR0013-2003-2004-Mustang-Valve-Cover-Breather-/120886427231?pt=Motors_Car_Tru ck_Parts_Accessories&vxp=mtr&hash=item1c25647e5f

I likey!!! :D
bolsen
05-08-2012, 08:41 PM
I was sold this:
http://www.racepartsolutions.com/prodimages/large/MBR-0005-1.jpg
It has a "double helix" base. The person who sold it to me, told me that they installed it in place of their oil cap. I can't even get it to fit at all. Am I missing something or have I been bamboozled?
bolsen
05-08-2012, 08:50 PM
Well I realized what happened. I was sold one for a Crown Vic. They have the "double helix" oil cap base. Needless to say, it doesn't work.