any1 have a REAL oil guage for sale please

[marauder410]

i wanted to replace the stock dummy oil pressure guage with the real deal like most of the other members have done so

so any1 have a used very good shaoe or new oil pressure guage they are willing to part with

so this is a pretty cheap mod to do right i seen the guage is only 50 on ebay and you have to run a wire to something obviosuly bout how much would it cost to get hooked up i can put it in the guage pod just need to wire ran or if it isnt very hard would just need a how to do intrutions thanks guys

[fastblackmerc]

i wanted to replace the stock dummy oil pressure guage with the real deal like most of the other members have done so

so any1 have a used very good shaoe or new oil pressure guage they are willing to part with

so this is a pretty cheap mod to do right i seen the guage is only 50 on ebay and you have to run a wire to something obviosuly bout how much would it cost to get hooked up i can put it in the guage pod just need to wire ran or if it isnt very hard would just need a how to do intrutions thanks guys

I'd replace the voltmeter also. You will notice a difference if you upgrade just one of the gauges.

These are the P/N's:
Replacement Gauges – Autometer (2 1/16)
Oil Pressure – 4327(usually comes with the sending unit below)
Sending unit – 2242
Voltmeter – 4391

I'd replace the bulbs for the gauges with green LEDs.

Very easy to replace both of the gauges.

Install the new sending unit, install a ring terminal on the OEM wire going to the sending unit, attach the connector to the terminal on the sending unit.

Do the same to the connectors at the OEM gauges.

Remove the old gauges, install the new ones.

I'll post up wire colors this weekend. Maybe some pics even............

[Rockettman]

Install instruction.

http://www.mercurymarauder.net/forums/faq.php?faq=how_to#faq_real_oi l_pressure_gauge

[marauder410]

ok thanks your the man FBM