PDA

View Full Version : Codes


BlackOps
06-12-2012, 10:44 AM
Can anyone tell me what the codes are... And the solution.

2195
2197
171

Thanks!
ctrlraven
06-12-2012, 10:46 AM
http://www.obd-codes.com/p0171

2195 and 2197 are 02 sensors bank 1 and 2 stuck to lean side probable causes are h02s, fuel pressure weak, injectors, intake leak.
BlackOps
06-12-2012, 10:57 AM
Read up on your link.... More than likely it would be the MAF! I just cleaned and oiled my filter. I'll check the MAF and clean in first! Thanks again!
ctrlraven
06-12-2012, 11:48 AM
That could be a very likely reason, the MAFS does not like the filter oil at all.
BlackOps
06-12-2012, 05:14 PM
Well the MAF cleaning did NOT do the trick! CEL was on for a day or two, and is now off, but the car has been cutting out randomly and a rough idle.???
ctrlraven
06-12-2012, 06:02 PM
Dumb question but is the MAFS plugged in?
BlackOps
06-12-2012, 06:22 PM
Hah... Yes it is!

Guess ill check the PCV. And the look into getting the 3" fuel filter next.
magindat
06-13-2012, 07:23 AM
Well the MAF cleaning did NOT do the trick! CEL was on for a day or two, and is now off, but the car has been cutting out randomly and a rough idle.???

Vac leak. Check the vac hose under the throttle body.
Rockettman
06-13-2012, 07:29 AM
Dumb question but is the MAFS plugged in?


Hah... Yes it is!

Guess ill check the PCV. And the look into getting the 3" fuel filter next.

MAFS ?? :confused:
(I know the the MAF is; but whats this?)
ctrlraven
06-13-2012, 08:37 AM
MAFS ?? :confused:
(I know the the MAF is; but whats this?)

MAF - Mass Air-Flow (Can be used to talk about the overall system)
MAFS - Mass Air-Flow Sensor (Can be used to describe the sensor itself)

Same exact thing, some add sensor on the end some don't.