View Full Version : Ss inserts (help)
airjordan2k8
09-18-2012, 11:34 AM
Just got a quick question about them ive had them for a few months but i didnt realize, but the letter E is starting to come up.. is there anything i can put to stick it back down? or am i gonna have to purchase new ones??? thanks
MM2004
09-18-2012, 11:39 AM
Just got a quick question about them ive had them for a few months but i didnt realize, but the letter E is starting to come up.. is there anything i can put to stick it back down? or am i gonna have to purchase new ones??? thanks
Carefully remove the letter, then clean both the bumper cover and the letter of all previous adhesive. Purchase a roll of the 3M double-sided tape and re-apply.
You should be good-to-go then.
Clean surfaces prepped with Alcohol is essential as mine have been on the car for 7 years, and not 1 issue.
Keep us posted.
Mike.
Krytin
09-18-2012, 11:40 AM
Just got a quick question about them ive had them for a few months but i didnt realize, but the letter E is starting to come up.. is there anything i can put to stick it back down? or am i gonna have to purchase new ones??? thanks
If it comes up enough to carefully remove it it is very easy to remove the old double sided tape & the new 3M double sided tape (available at the local parts store) can be applied to the back, carefully trimmed around the outline of the letter and reinstalled on the bumper (after thorough cleaning of the bumper).
I just did all of mine after "Frankenbumper" was rebuilt/repainted by the body shop - they all look just fine!
airjordan2k8
09-18-2012, 11:42 AM
Carefully remove the letter, then clean both the bumper cover and the letter of all previous adhesive. Purchase a roll of the 3M double-sided tape and re-apply.
You should be good-to-go then.
Clean surfaces prepped with Alcohol is essential as mine have been on the car for 7 years, and not 1 issue.
Keep us posted.
Mike.
I got the 3m... and do you think it would be best if i just do it on all the letters?? thanks for the response..
MM2004
09-18-2012, 11:44 AM
I got the 3m... and do you think it would be best if i just do it on all the letters?? thanks for the response..
Don't fix what aint broke.
:D
I would do the one letter, but keep an eye on the rest. If you lose 1 letter, it's buy a whole set time.
;)
Mike.
airjordan2k8
09-18-2012, 11:45 AM
If it comes up enough to carefully remove it it is very easy to remove the old double sided tape & the new 3M double sided tape (available at the local parts store) can be applied to the back, carefully trimmed around the outline of the letter and reinstalled on the bumper (after thorough cleaning of the bumper).
I just did all of mine after "Frankenbumper" was rebuilt/repainted by the body shop - they all look just fine!
Well the ones i got were from bobwhitedecals... and just had the sticky back no double-sided tape on the letters..
airjordan2k8
09-18-2012, 11:47 AM
Don't fix what aint broke.
:D
I would do the one letter, but keep an eye on the rest. If you lose 1 letter, it's buy a whole set time.
;)
Mike.
Sounds good, but do yall have the steel ones? cause i have the lil thin pieces..
MM2004
09-18-2012, 11:48 AM
Sounds good, but do yall have the steel ones? cause i have the lil thin pieces..
Yes. I have the SS (Stainless Steel) Inserts.
I shouldn't have assumed you had the same, even though they are the most popular.
Mike.
Krytin
09-18-2012, 11:54 AM
Well the ones i got were from bobwhitedecals... and just had the sticky back no double-sided tape on the letters..
I have the Stainless Steel Inserts - the decals will not work w/double sided tape.
airjordan2k8
09-18-2012, 12:00 PM
Sorry guys i guess i wrote the topic wrong... so im guessing theres no way to save the decal huh??? sorry for the confusion!
fastblackmerc
09-18-2012, 12:38 PM
Sorry guys i guess i wrote the topic wrong... so im guessing theres no way to save the decal huh??? sorry for the confusion!
If you really really really really careful, you might be able to save it.... How to get is stuck back on is another story.
airjordan2k8
09-18-2012, 12:41 PM
If you really really really really careful, you might be able to save it.... How to get is stuck back on is another story.
lol haha yea i wouldnt know what to put on it to stick back on... might just have to take them all off then...:bigcry:
Baconbit
09-18-2012, 12:45 PM
There is a person on ebay that sells the bumper insert decals for around ten bucks
airjordan2k8
09-18-2012, 12:58 PM
There is a person on ebay that sells the bumper insert decals for around ten bucks
Thanks i just found them on ebay...
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.