PDA

View Full Version : JPC 2nd Annual Dyno Shootout 11/17/2012



ctrlraven
09-27-2012, 10:25 AM
https://www.facebook.com/events/422527391143040/



Saturday, November 17, 2012
9:00am until 6:00pm in EST
JPC Dyno Shooutout
November 17th 2012
9am to 6pm

JPC will be hosting our 2nd dyno shootout on November 17th. At our first dyno event we dynoed over 25 cars and trucks with the winner of our shootout putting down over 660rwhp! Think you can beat it?

Not trying to compete? That's fine, come down and see what your car / truck makes. At the last event we dynoed everything from Cobra's to a lifted Dodge pickup with a big block. Don't have a car you want to dyno? Come down and hangout for the day. We'll be having another open house and we'll be rolling through cars on the dyno throughout the day so there's plenty of things to check out.

This event will be open to all rear wheel drive cars and trucks (non diesel) and it's first come first serve. The list fills up quick so come early, we will do our best to fit everyone in the best we can though. The pricing will be the same as last time -

3 Pulls w/o Air to Fuel - $50
3 Pulls with Air to Fuel - $80


Whats up for grabs ?
The winner of the event with the highest horsepower ride will get a plaque and a $100 gift certificate!

Where will it be?
The event will be hosted at Justin's Performance Center located at 301 Serendipity Drive, Millersville MD 21108.

Do I need to do anything special to my car?
Nope. All you need to do is make sure your car is ready to go before we call you up to the dyno to help us keep the event moving. Make sure you car has plenty of oil, coolant, ice (for those of you with Air/Water) and a half tank of fuel.

Will there be an open house like there was at the last event?
Yes, we will have the shop open for you to take a look around and check out our current projects.

How long does it normally take to strap down a car?
We normally get a car on and off the dyno within 20 minutes or less, we like to keep the event moving to get as many cars as we can on the dyno.

What kind of dyno do you use?
We use a Dyno Dynamic's dyno.

What if I want to dyno my car but I'd like to keep my numbers on the down low?
We can accommodate you.

DOOM
09-27-2012, 10:40 AM
I went to the first one. They also had a car show going on at the same time.

That's where I won this.

http://i920.photobucket.com/albums/ad47/DOOMIE/e74d15a1.jpg

Wonder if they will be doing the car show again this year???

ctrlraven
09-27-2012, 10:50 AM
I only posted this up cause I remember you went there before and I know how you like to dyno your car. lol

DOOM
09-27-2012, 11:01 AM
The funniest thing I saw when I was there!

This guy had a BRAND NEW Calloway camaro S/C "SS"

Everyone standing around when they put the car on the dyno was guessing 520 - 550RWHP! I guessed over 500RWHP myself! I mean c'mon it's a 6.2L V-8 with a blower and Calloway tuned! :rolleyes:

The car made less than 450RWHP on the dyno! :eek:

You should have seen the owners face!!! :mad2: :fire: :banghead: :cheesed: :argh:

breeze
09-27-2012, 11:40 AM
I'd be down.may put these headers on and see bout a tune.

DOOM
09-27-2012, 11:41 AM
I'd be down.may put these headers on and see bout a tune.

I thought you sold them!?

Glad you decided to keep them! :D

breeze
09-27-2012, 11:56 AM
I thought you sold them!?

Glad you decided to keep them! :D

Still up for grabs but wouldn't mind the extra power

SGT_MERC
09-27-2012, 12:01 PM
I will try to make that. Sounds like fun.

ctrlraven
09-27-2012, 01:45 PM
I will try to make that. Sounds like fun.
Got the beast running good now?

SGT_MERC
09-27-2012, 10:00 PM
Got the beast running good now?
Ive got a 450 RWHP tune on it right now and have about 2000 miles on the engine, I have to get 3" exhaust run over the axle and get the final tune done. I kept the original Termi block, crank and rods. New Termi heads, bored the block .020 over, stainless rings and bumped the compression up to 9 to 1. Stage 2 cams and a Lentec street/strip tranny. First dyno was too much boost, 23lbs, so I changed some pullies and got it down to 15 for now. Also have a 7gal. remote heat exchanger reservoir i will be mounting in the trunk, where the sub used to be. As soon as the exhaust is done, I'll be seeing what numbers she'll give me. :D
As soon everything is done, I'll be doing a complete write up with pics on the build and install.

ctrlraven
09-28-2012, 07:19 AM
Ive got a 450 RWHP tune on it right now and have about 2000 miles on the engine, I have to get 3" exhaust run over the axle and get the final tune done. I kept the original Termi block, crank and rods. New Termi heads, bored the block .020 over, stainless rings and bumped the compression up to 9 to 1. Stage 2 cams and a Lentec street/strip tranny. First dyno was too much boost, 23lbs, so I changed some pullies and got it down to 15 for now. Also have a 7gal. remote heat exchanger reservoir i will be mounting in the trunk, where the sub used to be. As soon as the exhaust is done, I'll be seeing what numbers she'll give me. :D
As soon everything is done, I'll be doing a complete write up with pics on the build and install.
Give Greg a call at Mandrel Bending Solutions (410) 360-7106) in Pasadena, MD.
http://www.mandrelbend.com/

Could come down early, have Greg make you some over axle pipes and then come on over to the show. Kills two birds with one stone. :banana:

SGT_MERC
09-28-2012, 07:28 AM
I did call Mandrel Bending solutions yesterday. He wasn't sure if the 3" would fit over the axle. I'm scheduled for the 11th to be down there at 8.

DOOM
09-28-2012, 07:37 AM
I did call Mandrel Bending solutions yesterday. He wasn't sure if the 3" would fit over the axle. I'm scheduled for the 11th to be down there at 8.

Good luck! :beer:

ctrlraven
09-28-2012, 08:13 AM
I did call Mandrel Bending solutions yesterday. He wasn't sure if the 3" would fit over the axle. I'm scheduled for the 11th to be down there at 8.
If anyone can make it happen if it possible Greg can do it.

DOOM
09-28-2012, 08:22 AM
CWRight has 3 inch over the axle pipe on his car!

It can be done!

DOOM
11-06-2012, 12:10 PM
Anyone going?

Wonder if they're doing a car show too?

DOOM
11-06-2012, 09:57 PM
:bump::bump:

breeze
11-16-2012, 08:04 AM
So who's goin

DOOM
11-16-2012, 09:01 AM
Breeze if you go let me know.

breeze
11-16-2012, 09:39 AM
Breeze if you go let me know.

I'm going! Glory days, what time?