PDA

View Full Version : made some headway on the mm this weekend


bill64
10-07-2012, 04:18 PM
well i only have the weekends to work on the car for the most part but if you read my older threds i recently bought the car and the car had some issues. one is the corner lights not working, looks like someone put a lcm out of an older car into mine that did not have the option for corner lights as inside the module there is no connection at the feed that supports the corner lights! so i orderd a pre programmed one tonight , but got the fog lamps up and working, also the car was overheating but found the problim today...an air lock. i know now these dohc engines are sensitive to air in the cooling system! well hope to have it on the road soon, not as a daily driver though
Krytin
10-07-2012, 05:06 PM
Good luck with the project - hope you get to put some road time in soon!
fastblackmerc
10-07-2012, 05:12 PM
well i only have the weekends to work on the car for the most part but if you read my older threds i recently bought the car and the car had some issues. one is the corner lights not working, looks like someone put a lcm out of an older car into mine that did not have the option for corner lights as inside the module there is no connection at the feed that supports the corner lights! so i orderd a pre programmed one tonight , but got the fog lamps up and working, also the car was overheating but found the problim today...an air lock. i know now these dohc engines are sensitive to air in the cooling system! well hope to have it on the road soon, not as a daily driver though

Never heard of anyone programming an LCM.

Please post the part # of your old LCM.

An LCM from a a late model CV, GM, or MM will work.
Spectragod
10-07-2012, 05:21 PM
If you need a LCM, let me know, I'll send you one.
bill64
10-08-2012, 12:06 PM
If you need a LCM, let me know, I'll send you one.
spectragod thanks much for the offer but I had allready ordered one !
as far as programming them i was not sure, but i remember reading somewhere that certain features can be programmed. but the one i bought is a reman by cardone. i belive the p/n on mine is 3w7t-13c788-ag. when i took it apart to trace out the circuit i found a date on the circuit board itself of 1996.