PDA

View Full Version : Brake Lights not working


ChasJr
10-14-2012, 07:20 AM
I switched my bulbs to LED and when I go to doing the 3rd brake light they stopped working..My running lights work ,but not my Brake lights..I checked fuse 19,but still no work..Any help?
fastblackmerc
10-14-2012, 08:05 AM
I switched my bulbs to LED and when I go to doing the 3rd brake light they stopped working..My running lights work ,but not my Brake lights..I checked fuse 19,but still no work..Any help?

Check the brake light switch. Make sure you have power going in, and power coming out when you press on the brake.
ChasJr
10-14-2012, 08:20 AM
Check the brake light switch. Make sure you have power going in, and power coming out when you press on the brake.


Where is that..
fastblackmerc
10-15-2012, 06:16 AM
Where is that..

On the brake pedal.
Curless
10-15-2012, 06:19 AM
Right here...the lower switch in the middle...with the green wires.
fastblackmerc
10-15-2012, 06:42 AM
Right here...the lower switch in the middle...with the green wires.

The LG/RD (Light Green / Red tracer) should have power all the time and the LG (Light Green) should have power when you depress the pedal.
ChasJr
10-15-2012, 11:52 AM
Thank you both very much...
ChasJr
10-16-2012, 12:37 PM
It was the switch got it fixed..Thanks again for the help
fastblackmerc
10-16-2012, 01:05 PM
It was the switch got it fixed..Thanks again for the help

Usually the switch or the wiring to the switch connector.

Glad you got it fixed.