Xcal help

[Blk04MM]

I just purchased a new computer and looking to download the proper program for me to load tunes sent to me etc...

Im looking on SCT website but there are a number of different ones. I dont want to download the wrong one.

can someone point me in the right direction please. I have an XCal2 (the small one)


thanks

[Blk04MM]

....nobody??

[MrBluGruv]

Dang, I don't even remember the name of it, but I do have it buried on my hard drive somewhere with my old Marauder tuning stuff. I can poke around and see if I can find it if you'd like, all I know is it worked for sure with the XCal3 I bought from Lidio years back.

[Blk04MM]

Dang, I don't even remember the name of it, but I do have it buried on my hard drive somewhere with my old Marauder tuning stuff. I can poke around and see if I can find it if you'd like, all I know is it worked for sure with the XCal3 I bought from Lidio years back.

I've had it on my other computer but it was done by someone else. Now I'm trying to put it on this computer. On the sct site it gives me a list of different ones to download. I'm confused as to which one(s) to download. Don't want to download the wrong thing

It's a windows laptop if that helps

[ctrlraven]

Do you have a Xcal2
http://sctflash.com/images/Products/Photos/X2_9400_Tech.jpg

Or Strategy Flasher (which looks like an Xcal2)
http://sctflash.com/images/Products/Photos/X2_9415_Tech.jpg

You will need these drivers for either one http://sctflash.com/software/XCal2_Drivers.exe

The program you need is called LiveLoad http://sctflash.com/software/LiveLoadFord.exe

[RacerX]

....nobody??
Is yours part # 9400? If so...

#1 is to download and install the Windows Drivers. Second from bottom here: http://www.sctflash.com/showdeviceupdates.php?PNID=940 0&DTYPE=

#2 Plug your device in to USB port. Download and install 4th from bottom, Programmer Device Update Software.

#3 Then, I would install the device firmware ver 1.14, second from top.

If you don't have the 9400, let me know.

[Blk04MM]

Do you have a Xcal2
http://sctflash.com/images/Products/Photos/X2_9400_Tech.jpg

Or Strategy Flasher (which looks like an Xcal2)
http://sctflash.com/images/Products/Photos/X2_9415_Tech.jpg

You will need these drivers for either one http://sctflash.com/software/XCal2_Drivers.exe

The program you need is called LiveLoad http://sctflash.com/software/LiveLoadFord.exe


The xcal2....

[RacerX]

The xcal2....
See above your post...

[Blk04MM]

Is yours part # 9400? If so...

#1 is to download and install the Windows Drivers. Second from bottom here: http://www.sctflash.com/showdeviceupdates.php?PNID=940 0&DTYPE=

#2 Plug your device in to USB port. Download and install 4th from bottom, Programmer Device Update Software.

#3 Then, I would install the device firmware ver 1.14, second from top.

If you don't have the 9400, let me know.

**The device isn't new i have used it a few times switching tunes that's on the xcal I just need to find out how to put the correct things on the new computer.

I don't see a part number but it is indeed the small handheld. Says xcal2 on it. Which on the site is the 9400

[Blk04MM]

See above your post...

I will try these steps and update you all

[RacerX]

Hold on. Is there any numbers or serial number on the back? If that came pre loaded with tunes, you need to find out if they're custom tunes from a tuner or if it came from sct preloaded. The update software could clear the tunes if it's not the right one.

[Blk04MM]

Hold on. Is there any numbers or serial number on the back? If that came pre loaded with tunes, you need to find out if they're custom tunes from a tuner or if it came from sct preloaded. The update software could clear the tunes if it's not the right one.

One tune is a Zach, the other two are from when the car was dynoed. I have the email of the zach tune in my email and the other two tunes I don't use anyway so I don't care to lose them if it came down to it.

I have my zach 410 tune I'm trying to load in the xcal so I can put it in the car tomorrow so the others would be of no use anyway

[RacerX]

Ahhh... You're good to go then!

[Blk04MM]

Ahhh... You're good to go then!

Thanks. I still haven't done it yet but I will and update the thread if it worked

[Blk04MM]

Hold on. Is there any numbers or serial number on the back? If that came pre loaded with tunes, you need to find out if they're custom tunes from a tuner or if it came from sct preloaded. The update software could clear the tunes if it's not the right one.


Do you have a Xcal2
http://sctflash.com/images/Products/Photos/X2_9400_Tech.jpg

Or Strategy Flasher (which looks like an Xcal2)
http://sctflash.com/images/Products/Photos/X2_9415_Tech.jpg

You will need these drivers for either one http://sctflash.com/software/XCal2_Drivers.exe

The program you need is called LiveLoad http://sctflash.com/software/LiveLoadFord.exe


thanks a lot it worked for me :beer: