I need infor on P.D. blower kits for MM

[SpartaPerformance]

From what I understand Trilogy no longer makes kits for MM's? What about an Eaton or Whipple? Anybody have a complete list of parts required to fit one of those on?

[Spectragod]

From what I understand Trilogy no longer makes kits for MM's? What about an Eaton or Whipple? Anybody have a complete list of parts required to fit one of those on?

Pages 8-15

http://www.trilogymotorsports.com/products/assets/MercuryMarauderSCManual.pdf

[blkZooM]

Your only chance of getting either one of the two to fit on are doing the eaton swap. the main parts you need are the 03-04 lower intake, intercooler, intake intercooler adapter and gotech (sp) brackets. A complete list can be found on the power adder section. About the eaton swap part list page 26 or 27 has basically everything you need

[guspech750]

Here is my list I used.

Eaton swap parts list

Eaton M112 Supercharger<<<<<<
Lower intake Manifold & Intercooler for M112<<<<<<
Billetflow Pullies and hub size 3.0 or bigger and a 2lb lower pully<<<<<<<
Cobra Intake Tube<<<<<<
Throttle Bracket<<<<<<
Ford Lightning 90mm MAF<<<<<<<
MAFia for Ford<<<<<<
New blower belt tensioner<<<<<<<
Battery, tray and cable:<<<<<<<<
IAT sensor from 199-2004 Ford Lightning and pigtail:<<<<<<<<<<
Heat exc (FrozenBoost Type 100)<<<<<<
IC pump<<<<<<
Fuel Injectors (39 lb)<<<<<<
IC reservoir<<<<<<
2 Belts<<<<<<<<
Eaton Swap brackets<<<<<<
Misc hoses, wires bolts and fittings
4" Air filter and adapter<<<<<<<<
Ford GT or SVT Focus Fuel Pump
Kenne Bell Boost-a-Pump 20amp<<<<<<<
Modified COT<<<<<<
Welding of COT or contact Zack


Alternator pulley f5az-10344-a Motorcraft gp-712


Sent from my iPhone 4S

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

[jb513]

From what I understand Trilogy no longer makes kits for MM's? What about an Eaton or Whipple? Anybody have a complete list of parts required to fit one of those on?

I have to ask.... Are you thinking about putting a kit together? PLEASE SAY YES!!!!!

[lji372]

I have to ask.... Are you thinking about putting a kit together? PLEASE SAY YES!!!!!


if so i know where there's a machine shop.....AND i might know who poured a lower intake ;) could see what info they might have if they did it;);). also know where there is a cmm to reverse engineer a few things shhhh........

[SC Cheesehead]

From what I understand Trilogy no longer makes kits for MM's? What about an Eaton or Whipple? Anybody have a complete list of parts required to fit one of those on?


Your only chance of getting either one of the two to fit on are doing the eaton swap. the main parts you need are the 03-04 lower intake, intercooler, intake intercooler adapter and gotech (sp) brackets. A complete list can be found on the power adder section. About the eaton swap part list page 26 or 27 has basically everything you need

Tommy,

PM me with your e-mail address and I can send you a more user friendly version of the Eaton swap info.

[jb513]

if so i know where there's a machine shop.....AND i might know who poured a lower intake ;) could see what info they might have if they did it;);). also know where there is a cmm to reverse engineer a few things shhhh........

You just became my new best friend!!!

[guspech750]

Tommy,

PM me with your e-mail address and I can send you a more user friendly version of the Eaton swap info.

I believe I already emailed that info you had sent me a while ago. ;)


Sent from my iPhone 4S

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

[jb513]

So Mr. Spartaperformance. Are you thinking about putting a blower kit together or are you just teasing me?? There are a LOT of members that would line up for this!!! Just saying...

[Limited360]

In for more info :)

[SpartaPerformance]

No I'm not putting a kit together. I needed the list for another performance shop. 1 of their customers dropped off a Marauder to them and said "make it faster".

[SC Cheesehead]

No I'm not putting a kit together. I needed the list for another performance shop. 1 of their customers dropped off a Marauder to them and said "make it faster".

Banjo Matthews - "Speed costs money, kid. How fast you wanna go?"

;)

[rocky]

So Mr. Spartaperformance. Are you thinking about putting a blower kit together or are you just teasing me?? There are a LOT of members that would line up for this!!! Just saying...

Yes...there would be a line!!!


Sent from my iPhone 5

[MarauderMike]

if so i know where there's a machine shop.....AND i might know who poured a lower intake ;) could see what info they might have if they did it;);). also know where there is a cmm to reverse engineer a few things shhhh........

I always wonder why some people think the lower intake used on the Marauder for the Eaton blower is anything other than a 2003 Mustang Cobra lower intake, slightly modified. :dunno:

[lji372]

I always wonder why some people think the lower intake used on the Marauder for the Eaton blower is anything other than a 2003 Mustang Cobra lower intake, slightly modified. :dunno:

Primarily because I talked to a guy a couple months back who told me his foundry worked on it indirectly. That's all nothing more than that.....:dunno:

Perhaps he misspoke???

[SC Cheesehead]

Primarily because I talked to a guy a couple months back who told me his foundry worked on it indirectly. That's all nothing more than that.....:dunno:

Perhaps he misspoke???

If the LIM is used for an Eaton swap, the OEM Cobra part is a direct bolt-on. If it's being used for a Trilogy set-up, then like Mike sez, yup, an adaptor is needed to position the blower head and intercooler correctly.