Repaired BCMs

[fastblackmerc]

If your blower motor isn't working or runs at one speed and tapping the BCM fixes the problem you need a BCM.

I can now offer repaired BCM's, Blower Control Module

These units are repaired and tested. Guaranteed to not fail again.

As you know even a new BCM will eventually fail, just like the LCM's and EATC's.

The cost is $25.00 (shipping included)

The only thing I ask is that you send your old BCM back so I can repair it and get it to someone else.

[IwantmyMMnow!]

^^^+1^^^

Mine quit working December last year; got a FBM-repaired BCM and it's been working like a champ since then.

Just one question, Jim; what am I supposed to do with the radioactive waste? :D

[fastblackmerc]

^^^+1^^^

Mine quit working December last year; got a FBM-repaired BCM and it's been working like a champ since then.

Just one question, Jim; what am I supposed to do with the radioactive waste? :D

Dump it anywhere.

[PRCARGUY]

Hmm... :bows:

[jb513]

Hi Jim. I was wondering if I could change all the backlite dash gages from green to red? I have a radio that i can change the colour infinatly and all though green looks ok the red pops and would really look good if all the bulbs were red. I guess I can't do anything about the clock? It being a 03 it has the clocks in the dash. Thanks. Jeff.

[fastblackmerc]

Hi Jim. I was wondering if I could change all the backlite dash gages from green to red? I have a radio that i can change the colour infinatly and all though green looks ok the red pops and would really look good if all the bulbs were red. I guess I can't do anything about the clock? It being a 03 it has the clocks in the dash. Thanks. Jeff.

They can be changed but it's alot of tedious work..... not as simple as changing bulbs. Gauges have to come apart, the green film has to be removed and then everything has to be reassembled.

I can do it but the labor cost would be very very high.

[jb513]

They can be changed but it's alot of tedious work..... not as simple as changing bulbs. Gauges have to come apart, the green film has to be removed and then everything has to be reassembled.

I can do it but the labor cost would be very very high.

Thanks for this Jim. I didn't realize there was film involved, thought it was just bulbs. Oh well, I'll add it to the list when I win the lottery!!

[xopher]

I'm next in line in the BCM pool. Sent you a PM, Jim.

[fastblackmerc]

As you may know I repair failed BCMs and send them to members for a slight fee. I ask that the old BCM be sent back so I can continue the cycle.

I don't have any in stock since I haven't gotten any returned.

If you have old BCM(s) I'll pay the shipping if you send them to me.

[fastblackmerc]

I have four repaired BCM's ready for shipment.

$25.00 shipped, all I ask is that you return your old one so can repair it and offer it to another member.

[fastblackmerc]

:bump: :bump:

[Baconbit]

Still available? I would like one but it will be a few weeks before I can get the old one out and sent back to you.

[fastblackmerc]

Still available? I would like one but it will be a few weeks before I can get the old one out and sent back to you.

Yes, PM me.

[Gerry24]

Thanks for the heads up Fastblackmerc

[fastblackmerc]

Does anyone have any old BCM's they need to get rid of?

[SilverPhoenix]

Hey Jim, sent you a PM roughly a week ago. My ETAC only works on 2 settings, off and full blast. I'm in the Charlotte area now so can drive to your place to do a BCM swap. Let me know when you'd be available, thanks.