2,4shofast
04-02-2013, 07:40 AM
Congratulations to Embassy for being pick for Marauder of the Month for April 2013. Thank you everyone for your making this happen, I hope we can keep it going and work the bugs out as we go!:beer:
My pile:
2003 300A
Built 06/2002
Sequence #679 of total MM production
56,000 miles
Original black exterior with charcoal interior.
Mods:
Engine: 32V 4.6L V8
Modifications:
Ported and Polished upper and lower intake
Port-matching 62mm BBK throttle body
Supercharger system- FIT ProCharger Kit #3, consists of:
- P1SC ProCharger centrifugal supercharger, polished, with a 3.7" pulley spooling up 10 psi of boost at ~6000 rpm
- Two-core air-to-air ProCharger intercooler, lower-grill mounted w/ custom scoop
- ProCharger ProFlo surge valve
- Motorcraft AGSF-22C sparkplugs @ 0.032" gap
- Motorcraft 39lb injectors
- 255 lph Walboro fuel pump
- 90mm SCT BA300 MAF
- K&N conical filter pn: RF-1015
- Modified coolant transfer tube
- Relocated IAT to throttle body intake transition
- All piping powdercoated
Ingition system
- Granatelli COP connectors
- 200 amp powdercoated black altenator
Cooling system- 180 Deg F T'stat, DR head cooling mod
PCV system- Motorcraft EV-153 reverse PCV flow mod & PCV
Drivetrain:
Transmission -Stock with Precision Industries 3000 rpm stall torque converter.
Exhaust system- DR Cobra Exhaust kit w/ Magnaflow (pn 14356) mufflers and x-pipe delete (custom h-pipe), 4" Megs resonator delete tips
Rearend- SVO 4.30 gears, Moser 31-spline axles, Detroit TrueTrac torsen differential, FMS axle girdle & stud kit
Traction- Widened rear OEM wheels and 295/45/18 Nitto NT 555 street radials. 255/45/18 Nitto NT 555 street radials on the front.
Suspension modifications:
- Addco front and rear anti-sway bars
- Zack & Mac improved rear control arms
- 1-coil cut front coils, front end alignment to Carfixer's specs
- Rear lowered via air suspension
Braking system modifications:
- TCE Wilwood Front Street Sport brake kit w/ BP10 pads
- TCE stainless steel brake lines
Appearance modifications:
- CAR Motorsports custom hood liner
- CAR Motorsports custom trunk lid liner
- CAR Motorsports front and rear, and steering wheel Godshead emblems
- Safety Yellow powdercoated cam covers
- Powdercoated 32V 4.6L coil covers
- Muth LED turn signal side mirrors
- Lower grill mod
- Colex Custom cap covers
- Professionally Tinted Taillamps
- Reflective Black Marauder bumper inserts.
- Silver coated turn signal bulbs
- Marauder rear license plate frame
Interior:
- Autometer Ultra Lite II trans, volt, and oil pressure gauges.
- Dual a-pillar pod with Autometer air/fuel and boost gauge.
- "Bullet" aluminum door pins and bezels
Stereo modifications:
- Rockford Fosgate RFC3268 6" x 8" two-ways
- Rockford Fosgate 201S amp hooked to RFP4406 6 3/4" sub (mid, whatever) woofer installed in ported OEM sub enclosure.
Other modifications:
- Dynojet Wideband Commander O2 datalogger / gauge
- Metco drive shaft loop
- "Pro-Gard" rear fascia wind deflector
- Rostra Obstical Sensing System
http://www.supermotors.net/getfile/793594/original/rig1.jpg
http://www.supermotors.net/getfile/793591/original/engine2.jpg
My pile:
2003 300A
Built 06/2002
Sequence #679 of total MM production
56,000 miles
Original black exterior with charcoal interior.
Mods:
Engine: 32V 4.6L V8
Modifications:
Ported and Polished upper and lower intake
Port-matching 62mm BBK throttle body
Supercharger system- FIT ProCharger Kit #3, consists of:
- P1SC ProCharger centrifugal supercharger, polished, with a 3.7" pulley spooling up 10 psi of boost at ~6000 rpm
- Two-core air-to-air ProCharger intercooler, lower-grill mounted w/ custom scoop
- ProCharger ProFlo surge valve
- Motorcraft AGSF-22C sparkplugs @ 0.032" gap
- Motorcraft 39lb injectors
- 255 lph Walboro fuel pump
- 90mm SCT BA300 MAF
- K&N conical filter pn: RF-1015
- Modified coolant transfer tube
- Relocated IAT to throttle body intake transition
- All piping powdercoated
Ingition system
- Granatelli COP connectors
- 200 amp powdercoated black altenator
Cooling system- 180 Deg F T'stat, DR head cooling mod
PCV system- Motorcraft EV-153 reverse PCV flow mod & PCV
Drivetrain:
Transmission -Stock with Precision Industries 3000 rpm stall torque converter.
Exhaust system- DR Cobra Exhaust kit w/ Magnaflow (pn 14356) mufflers and x-pipe delete (custom h-pipe), 4" Megs resonator delete tips
Rearend- SVO 4.30 gears, Moser 31-spline axles, Detroit TrueTrac torsen differential, FMS axle girdle & stud kit
Traction- Widened rear OEM wheels and 295/45/18 Nitto NT 555 street radials. 255/45/18 Nitto NT 555 street radials on the front.
Suspension modifications:
- Addco front and rear anti-sway bars
- Zack & Mac improved rear control arms
- 1-coil cut front coils, front end alignment to Carfixer's specs
- Rear lowered via air suspension
Braking system modifications:
- TCE Wilwood Front Street Sport brake kit w/ BP10 pads
- TCE stainless steel brake lines
Appearance modifications:
- CAR Motorsports custom hood liner
- CAR Motorsports custom trunk lid liner
- CAR Motorsports front and rear, and steering wheel Godshead emblems
- Safety Yellow powdercoated cam covers
- Powdercoated 32V 4.6L coil covers
- Muth LED turn signal side mirrors
- Lower grill mod
- Colex Custom cap covers
- Professionally Tinted Taillamps
- Reflective Black Marauder bumper inserts.
- Silver coated turn signal bulbs
- Marauder rear license plate frame
Interior:
- Autometer Ultra Lite II trans, volt, and oil pressure gauges.
- Dual a-pillar pod with Autometer air/fuel and boost gauge.
- "Bullet" aluminum door pins and bezels
Stereo modifications:
- Rockford Fosgate RFC3268 6" x 8" two-ways
- Rockford Fosgate 201S amp hooked to RFP4406 6 3/4" sub (mid, whatever) woofer installed in ported OEM sub enclosure.
Other modifications:
- Dynojet Wideband Commander O2 datalogger / gauge
- Metco drive shaft loop
- "Pro-Gard" rear fascia wind deflector
- Rostra Obstical Sensing System
http://www.supermotors.net/getfile/793594/original/rig1.jpg
http://www.supermotors.net/getfile/793591/original/engine2.jpg