Finally!!!

[marauder21]

About time i take Diabolical(My marauder lmao) to the shop!!....why you my ask?
Well since i missed Louisville:( i awarded myself by finally getting the chance to install the 4.10 gears.
Now let's see what's the big deal...lol
Any tips/hints on what to do and NOT do when first getting the gears installed? :)

[lji372]

Congrats on the gears but not worth missing Louisville :D
Just my .02

[marauder21]

Congrats on the gears but not worth missing Louisville :D
Just my .02

I know :(
But soon ill be going to Louisville! Soon! Lol so for now ill just enjoy my gears:)

[fastblackmerc]

About time i take Diabolical(My marauder lmao) to the shop!!....why you my ask?
Well since i missed Louisville:( i awarded myself by finally getting the chance to install the 4.10 gears.
Now let's see what's the big deal...lol
Any tips/hints on what to do and NOT do when first getting the gears installed? :)

What did your installer recommend?

I'd run 70w140 synthetic fluid.

[lji372]

I know :(
But soon ill be going to Louisville! Soon! Lol so for now ill just enjoy my gears:)

and i'll see you there:beer:

[marauder21]

What did your installer recommend?

I'd run 70w140 synthetic fluid.

If i can recall i got royal purple 75 140 i believe...i just remember it was a PITA to exchange the royal purple from 75 90 to 75 140 lol

[SC Cheesehead]

Take it easy for the first couple of heat cycles to allow the gears to break in.

[Mac-MerC]

DRIVE AND ENJOY!
I was not told to break them in..... I was told to enjoy them! I was also told if someone who knows what their doing does the install u dont have anything to worry about.

[guspech750]

Awesome Junior!!

:burnout:

I took it easy leaving Deans. But That lasted 5 minutes. Going on 3 years of quiet gears. :burnout:


Sent from my iPhone 4S

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

[marauder21]

and i'll see you there:beer:

God willing and nothing happens next Louisville im down!!' Lol


Take it easy for the first couple of heat cycles to allow the gears to break in.

This is what ive heard from people, to take it easy within the first few miles of the gear install. So is it true i should take it easy for 300 miles?? :confused::what:

[yjmud]

I took it easy on mine for about two hundred then I changedthe fluid and it was game on from there

[marauder21]

I took it easy on mine for about two hundred then I changedthe fluid and it was game on from there

Aawwww i have to wait? :( and wait whoa....you have to change the fluid Again!? Lol :what:
Dammit. So i have to go look for 75 140 royal purple fluid once more:/

[Dave1kRR]

Aawwww i have to wait? :( and wait whoa....you have to change the fluid Again!? Lol :what:
Dammit. So i have to go look for 75 140 royal purple fluid once more:/

Nah, Mobil 1 or Valvoline will do just as good. I used Mobil 1 75w140 Full Syn

[SC Cheesehead]

DRIVE AND ENJOY!
I was not told to break them in..... I was told to enjoy them! I was also told if someone who knows what their doing does the install u dont have anything to worry about.

Yeah, I've heard both ways. Personally, I started driving mine pretty hard right away and haven't had any issues, so maybe it is all in the install like you mentioned (my guy was a top notch wrench).

[marauder21]

Oh ok...so do i really really have to change the fluids afterwards:(

And this what imma do, im just going to take it easy until i get the tune from Zack-master :thumbup::D

[lji372]

my thinking on breaking in is better safe than sorry. ask 6 guys it'll be 3 to 3.

[marauder21]

my thinking on breaking in is better safe than sorry. ask 6 guys it'll be 3 to 3.

Wwaaaaiiittttt.....lol what exactly do you mean :what: lol

[lji372]

Wwaaaaiiittttt.....lol what exactly do you mean :what: lol

lets cut the crap i'll break'm in for you:D
you just sit home and relax:banana2:

[justbob]

Nah, Mobil 1 or Valvoline will do just as good. I used Mobil 1 75w140 Full Syn

If you actually use your clutches like I do, they will chatter in three weeks or less using Mobil 1 unless you actually add friction Modifier.


Self proclaimed Builder Of Badassery.

[Bradley G]

I just used Ford diff fluid and friction modifier, I did have some binding on slow hard cornering when I did 31 spline axles, Cobra carrier , F150 spring for the clutch discs.
I did an extra bottle of Whale sperm (friction modifier)and Volia ! the corner tugging subsided , after I whipped her around for a while.

[LOWBUCKMM]

Oh ok...so do i really really have to change the fluids afterwards:(

And this what imma do, im just going to take it easy until i get the tune from Zack-master :thumbup::D


No you don't have to change fluid after break in. I have 30k on my 4.10's and never changed fluid. It's solid as can be. Even with a couple 1.6 60foot lunches.

And as far as break in I think I had almost 7 miles on it be for I beat on it. But it's your car do what you want.

[Mac-MerC]

No you don't have to change fluid after break in. I have 30k on my 4.10's and never changed fluid. It's solid as can be. Even with a couple 1.6 60foot lunches.

And as far as break in I think I had almost 7 miles on it be for I beat on it. But it's your car do what you want.

Yo i dont even think i made it 1 mile lol. As soon as i left MO's i hit it all the way across Atlanta. No issues here

[guspech750]

No you don't have to change fluid after break in. I have 30k on my 4.10's and never changed fluid. It's solid as can be. Even with a couple 1.6 60foot lunches.

And as far as break in I think I had almost 7 miles on it be for I beat on it. But it's your car do what you want.

Word!!


Sent from my iPhone 4S

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

[marauder21]

Just got back from Dean's performance shop...and ummm......:D
Yeah, idk where to begin lol
Didn't really get ti enjoy that much because there was some traffic, but when there was room...oooohhhhh man.......AMAZING lol i must say, it was worth it.
So far so good.. just gonna drive it a little longer so i can actually "break it in" some more ;)

[justbob]

You should have swung by my pad. I would have broken it in for you..


Self proclaimed Builder Of Badassery.

[guspech750]

Just got back from Dean's performance shop...and ummm......:D
Yeah, idk where to begin lol
Didn't really get ti enjoy that much because there was some traffic, but when there was room...oooohhhhh man.......AMAZING lol i must say, it was worth it.
So far so good.. just gonna drive it a little longer so i can actually "break it in" some more ;)

Tear that **** up!!:burnout:


Sent from my iPhone 4S

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

[ChiTownMaraud3r]

Congrats on the performance mod.

I've been holding out on 410s as I always wanted to supercharge later on without increasing gear size.

[marauder21]

Tear that **** up!!:burnout:


Sent from my iPhone 4S

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

Lol no no..not just yet my good sir..imma try and hold in the urge till Sunday THEN we'll let the ass tearing begin!! :thumbup::D:beer:


Congrats on the performance mod.

I've been holding out on 410s as I always wanted to supercharge later on without increasing gear size.

Well now that the major mods i was going for are finally done..i can finally save up for that SC..if you want after Sunday i can let you try out the car to give you an idea for the 4.10s


You should have swung by my pad. I would have broken it in for you..


Self proclaimed Builder Of Badassery.

How far you live from Deans!? :eek: lol if you would've said something i might've just stopped by!! Lol so...random but umm this Jmod i keep hearing about, is it worth it my good sir?? ;)

[justbob]

How far you live from Deans!? :eek: lol if you would've said something i might've just stopped by!! Lol so...random but umm this Jmod i keep hearing about, is it worth it my good sir?? ;)

About 3 miles south of County Farm Rd. & 64. Winfield. So quite a bit closer to you.

Jmod? Most definitely.




Self proclaimed Builder Of Badassery.

[marauder21]

About 3 miles south of County Farm Rd. & 64. Winfield. So quite a bit closer to you.

Jmod? Most definitely.




Self proclaimed Builder Of Badassery.

Oh that's not too far from me..its like a good 35 minutes!! Im on 1st ave and cermak in North riverside lol

And hhmmm well that might be something to do later on....who knows ;) we'll keep in touch lmao

[guspech750]

Oh that's not too far from me..its like a good 35 minutes!! Im on 1st ave and cermak in North riverside lol

And hhmmm well that might be something to do later on....who knows ;) we'll keep in touch lmao

Do it. Jmod now biatch. Chop chop!!


Sent from my iPhone 4S

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

[marauder21]

Do it. Jmod now biatch. Chop chop!!


Sent from my iPhone 4S

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

Lol all in good time!! Lol
Im starting a new job so let me get settled in, save a little more, THEN ill beg Bob to hook it up with the Jmod lol.
That's like $250 job no?

[guspech750]

Lol all in good time!! Lol
Im starting a new job so let me get settled in, save a little more, THEN ill beg Bob to hook it up with the Jmod lol.
That's like $250 job no?

More like over 9,000!!


Sent from my iPhone 4S

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

[marauder21]

More like over 9,000!!


Sent from my iPhone 4S

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

Lol raincheck? Or maybe he accepts credits cards??? Lmao

[STEPS]

add a ford racing dif cover

[marauder21]

add a ford racing dif cover

Serious question here but what would be the point of that other than appearance??? Lol I thought the 4.10s where a perfect fit..:confused::rolleyes:

[justbob]

add a ford racing dif cover

And a built trans.


Self proclaimed Builder Of Badassery.

[marauder21]

And a built trans.


Self proclaimed Builder Of Badassery.
Anything else? Lmao i honestly have no idea what all these parts would do...open to be educated lmao

And Joe, notice anything New!? ;)

DTR + 4.10's + something = WwwrreeeeeeeeeeeeddDAM!!

[justbob]

Control arms.


Self proclaimed Builder Of Badassery.

[marauder21]

Yes!! ^^ my next mod will be either Jmod or control arm...which ever comes first lol

Sent from my Android

DTR + 4.10's + something = Wrreeeeeeeeeeeedam!

[marauder21]

SC would be next...like in a year or so lmfao

Sent from my Android

DTR + 4.10's + something =
Wreeeeeeeeeeeedam!

[SC Cheesehead]

Serious question here but what would be the point of that other than appearance??? Lol I thought the 4.10s where a perfect fit..:confused::rolleyes:

The FRPP cover includes a girdle with load bolts that provide additional support for the differential bearing caps.

[guspech750]

LOL!

Nice signature. :burnout:


Sent from my iPhone 4S

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

[marauder21]

The FRPP cover includes a girdle with load bolts that provide additional support for the differential bearing caps.

But the question is, is it really necessary? Lol idk so far i think the car rides really good!!

Lmao why thank you Joe;)
Guess you can say, I've been inspired lol

Sent from my Android

DTR + 4.10's + something =
Wreeeeeeeeeeeedam!

[LOWBUCKMM]

But the question is, is it really necessary?

Not really for a low horse power car. But little extra support never hurts.

[marauder21]

Not really for a low horse power car. But little extra support never hurts.

Aahhh see..lol then im good :) if anything ill invest that money somewhere else ;)

Sent from my Android

DTR + 4.10's + something =
Wreeeeeeeeeeeedam!

[VMARAUDER]

Just got my 4.10s too and drove like I normally do ....zoooommm and all is good.
Enjoy what you have...You will want to do more in tbe future.

[marauder21]

Just got my 4.10s too and drove like I normally do ....zoooommm and all is good.
Enjoy what you have...You will want to do more in tbe future.

Did you get a tune already? If your in the Chicagoland area you can come with me!! Lol im getting together a group to head out to meet up with zack on Sunday so we can get a tune:thumbup::D:beer:

Sent from my Android

DTR + 4.10's + something =
Wreeeeeeeeeeeedam!

[marauder21]

Got back from Zacks house!! Lol tune was so worth it..if you drive a marauder, get 4.10s nuff said.

But i had to leave early cause i was afraid he was gonna make me do some landscaping on his house ;) lmao

Sent from my Android

DTR + 4.10's + something =
Wreeeeeeeeeeeedam!

[Mac-MerC]

damn i need to visit Chicago

[marauder21]

damn i need to visit Chicago

Yes, yes you do...lol we welcome you

Sent from my Android

DTR + 4.10's + something =
Wreeeeeeeeeeeedam!

[guspech750]

damn i need to visit Chicago

Well come on over where the sun is somewhere, the rain is, often, the cold is here to stay, state debt is out of control and the Marauder owners are plentiful.


Sent from my iPhone 4S

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

[justbob]

"Where the members try to break stuff" LOL


Self proclaimed Builder Of Badassery.

[Mac-MerC]

I do got fam in Gary, East Chicago and Hammond..... hmmmmmmm

[guspech750]

I do got fam in Gary, East Chicago and Hammond..... hmmmmmmm

WINNING!!


Sent from my iPhone 4S

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

[MyBlackBeasts]

Serious question here but what would be the point of that other than appearance??? Lol I thought the 4.10s where a perfect fit..:confused::rolleyes:

The girdle supports the carrier bearing caps under the WOT pressures to prevent early failure. Also gives some extra fluid capacity. And the reason I got one, easy-peezy drain & refill! :D

[MyBlackBeasts]

Lol all in good time!! Lol
Im starting a new job so let me get settled in, save a little more, THEN ill beg Bob to hook it up with the Jmod lol.
That's like $250 job no?

http://www.mercurymarauder.net/forums/showthread.php?t=82460

Jmod Cost:
$24 for upgraded seperator plate
$4 for gasket 1
$3 for gasket 2
Filter Kit
10 qts ATF

[justbob]

I do got fam in Gary, East Chicago and Hammond..... hmmmmmmm

Anytime man. We are known to feed quests quite well. Hell, I still have multiple cases of misc beer and hard stuffs from the last time someone came up! What's your favor? I'd be surprised if i don't have it, and would make sure to stock up for ya! I only drink girly umbrella stuff hence the stock I have..


Self proclaimed Builder Of Badassery.

[justbob]

http://www.mercurymarauder.net/forums/showthread.php?t=82460

Jmod Cost:
$24 for upgraded seperator plate
$4 for gasket 1
$3 for gasket 2
Filter Kit
10 qts ATF

Or my house, $200, bring oil, filter and pan gasket. I supply gaskets and exchange your pan with another one with a drain plug... I'll even autograph your new pan! :D


Self proclaimed Builder Of Badassery.

[marauder21]

Or my house, $200, bring oil, filter and pan gasket. I supply gaskets and exchange your pan with another one with a drain plug... I'll even autograph your new pan! :D


Self proclaimed Builder Of Badassery.

I might hold you to that, later on though lol :D
But i got a question, the jmod, to my knowledge only does hard shifts and it makes the tires screech at 2nd shift right?
Well yesterday when i was out enjoying the 4.10s my tires would screech at 2nd shift....i mean if thats normal for 4.10s why get the Jmod?? :confused:

Sent from my Android

DTR + 4.10's + something =
Wreeeeeeeeeeeedam!

[justbob]

Because you are rely'ing on jacked up shift pressures instead of mechanically achieving it.


Self proclaimed Builder Of Badassery.

[marauder21]

Because you are rely'ing on jacked up shift pressures instead of mechanically achieving it.


Self proclaimed Builder Of Badassery.

Sssoooo pretty much..in other childish words, instead of MAKING it happening by pressuring the 2nd shift, with the jmod it'll suppose to be doing that?? Lol oh ok ok i got this..alright well givr me time and ill be setting an appointment with dr bob:)

Sent from my Android

DTR + 4.10's + something =
Wreeeeeeeeeeeedam!

[Mebot]

http://www.mercurymarauder.net/forums/showthread.php?t=82460

Jmod Cost:
$24 for upgraded seperator plate
$4 for gasket 1
$3 for gasket 2
Filter Kit
10 qts ATF

these parts are what I need to get. thanks!

sent from space

[Mebot]

once a jmod is performed is there any special requirements going forward in regards to scheduled maintenance?

meaning, when it comes time to flush my trans again, do I need to do anything different now that I have the jmod?

sent from space

[justbob]

once a jmod is performed is there any special requirements going forward in regards to scheduled maintenance?

meaning, when it comes time to flush my trans again, do I need to do anything different now that I have the jmod?

sent from space

No.


Self proclaimed Builder Of Badassery.

[Mebot]

cool thanks

sent from space