HELP! fuel rail/injector removal?

[loud2004marquis]

Wanted to make sure I'm not going to break anything...

Tried opening the schrader valve on the fuel rail and no pressure. So I look at the injectors and it appears they're held onto the rail by little metal clips.

I did take one of the little metal clips off the top of one of the injectors, so does the injector simply pull off the rail or do I need a special tool?

Already removed the four bolts that mount the fuel rail and am looking to remove it and take off the injectors.

[breeze]

I believe their held on by a o-ring.

[Blackened300a]

Remove the 4 hold down bolts on the rail and wiggle it out. I usually spray a little WD-40 on the bottom of the injectors to help them pull out easier. Most of the time the injectors will stay in the rail. If one pops out, its held in with a metal push clip that may bounce out. Just wiggle back and forth with light pressure straight up and they will stay in the rail.

[Mike M]

What are you trying to accomplish?

[loud2004marquis]

Thanks guys, worked like a charm!


What are you trying to accomplish?


Eaton Swap

[Mike M]

Thanks guys, worked like a charm!



Eaton Swap

Sweet!!!!!