Removing parts

[cruzer]

I need to change the bulbs in the rear window mounted stop light. How do you remove the cover without breaking anything ? Also, I need to remove the liner in the center console to repair the locking mechanism--how do I get it out ?Thanks in advance, Maury

[MyBlackBeasts]

I need to change the bulbs in the rear window mounted stop light. How do you remove the cover without breaking anything ?

Phillips screws, 1 on each side.

Remove both & housing lifts right off.

Easy access.

[fastblackmerc]

Remove the phillips head screw from both sides of the CHMSL and you can remove it.

Open the center console and the liner lifts out.

[Mebot]

Phillips screws, 1 on each side.

Remove both & housing lifts right off.

Easy access.

I was going to post that but I thought that was too easy of an answer

Maury are you taking about taking the light itself apart?

sent from a Samsung Galaxy far far away...

[fastblackmerc]

I was going to post that but I thought that was too easy of an answer

Maury are you taking about taking the light itself apart?

sent from a Samsung Galaxy far far away...

In his original post Maury said he just wanted to change the bulbs.

[Mebot]

In his original post Maury said he just wanted to change the bulbs.

correct. I know there are two screws on either side of the housing. You pull it up and disconnect it. But actually replacing the bulb itself, not sure

sent from a Samsung Galaxy far far away...

[fastblackmerc]

correct. I know there are two screws on either side of the housing. You pull it up and disconnect it. But actually replacing the bulb itself, not sure

sent from a Samsung Galaxy far far away...

Once you get the CHMSL loose you squeeze the white tabs and the bulb housing comes out. The bulbs are type 912, the larger version of the 168 bulb.

[cruzer]

Had no problem with the tailight. Can't seem to get console liner out. Is loose on passenger side but really tightly secured on driver's side. Tried sliding blade down side. Seem to hit some sort of clip but can't get any release. ?????? I don't want to pull too hard because the plastic is so brittle. Help. Maury

[cruzer]

Well, it took some time, but , all is well in my Marauder family. Got the high tail light fixed with no problems. Finally got the console box six pieces back into a working piece. Ain't Super Glue wonderful !! I still can't find half my Marauder stuff since the move over a year ago, I'm frustrated at times---guess that comes with age;) Stay safe all, Maury

[SC Cheesehead]

Well, it took some time, but , all is well in my Marauder family. Got the high tail light fixed with no problems. Finally got the console box six pieces back into a working piece. Ain't Super Glue wonderful !! I still can't find half my Marauder stuff since the move over a year ago, I'm frustrated at times---guess that comes with age;) Stay safe all, Maury

You know what they say, Maury:

http://www.sjtent.com/ef/shoppingcart/images/smallimages/69032.jpg

;)------------------> :D

[gdmjoe]

.
Excerpted from the often forsaken souce of information - the owner's manual ...
http://www.gdmjoe.com/marauder/chmslbulbs.jpg
Don't have one?
Owner Manuals (https://www.fleet.ford.com/maintenance/owners_manuals/default.asp) ««« -click-
» [ Choose Year ] » [ Choose Make ] » [ Choose Model ] » http://www.gdmjoe.com/images/submit.jpg