Crown Vic fog light install

[Hg M75]

Any wiring gurus that can help me out? A popular install for us bottom rung Crown Vic guys is to install Ford Focus for lamps on the corners of the front bumper. The Focus lights fit neatly there and can be wired to work with a factory headlamp switch that has the fog light option, you lucky Marauder owners! Your factory fogs are wired to a relay that turns them off when the high beams are turned on, but I'm not too concerned with that. Also two pins (3 and 6) are added to the factory head light harness plug to operate the fogs. I have the below diagram I am planing on using to wire everything up. Can someone with a better knowledge of relays tell me if its correct? I would probably change 85 from high beams to side marker light since I'm not going to wiring in the high beam cut off relay, thanks!

http://imageshack.com/a/img7/1594/xprl.jpg

[Speed]

Hg m75,
I have done this install, I used the information listed below...hope it helps out. Also I went ahead and purchased a MM head light switch with fog light option; it gives it the factory look I was looking for vs adding a switch. If you need any help let me know. I’d be glad to show you my set up.




http://www.crownvic.net/ubbthreads/ubbthreads.php?ubb=showflat&Number=2143839&gonew=1#UNREAD

[Hg M75]

Thanks, PM sent.

[Hg M75]

Any other thoughts on this?