PDA

View Full Version : rear fascia fix


steve fox
09-11-2013, 02:41 PM
Guys, It seems I read on this site (although I can not find it now) someone had offered a panel which attached to the bottom of the fuel tank and the bottom of the rear fascia. It would keep the plastic bumper cover from billowing out at speed. I sure would like to get one of these. It will save a bit of inventing on my part to build something. Thanks.
fastblackmerc
09-11-2013, 02:45 PM
Guys, It seems I read on this site (although I can not find it now) someone had offered a panel which attached to the bottom of the fuel tank and the bottom of the rear fascia. It would keep the plastic bumper cover from billowing out at speed. I sure would like to get one of these. It will save a bit of inventing on my part to build something. Thanks.

It's called Pro Guard.

DR has them and you can find them on the internet.
MMBLUE
09-11-2013, 02:48 PM
Here you go Steve http://www.musclemerc.com/
Limited360
09-11-2013, 04:14 PM
Just got mine...

http://img.tapatalk.com/d/13/09/12/a9yne2a4.jpg
ChiTownMaraud3r
09-11-2013, 04:27 PM
Its also called zip ties. You can just slice into the bumper enough to hold it up with a couple ties. Done.
Limited360
09-11-2013, 04:37 PM
Its also called zip ties. You can just slice into the bumper enough to hold it up with a couple ties. Done.

This has more function. Prevents the corner sag by preventing air to go under in those places at high speed
lji372
09-11-2013, 04:50 PM
This has more function. Prevents the corner sag by preventing air to go under in those places at high speed

Is that the same as this?.

http://musclemerc.com/Parts-1_s.html
Limited360
09-11-2013, 04:53 PM
Is that the same as this?.

http://musclemerc.com/Parts-1_s.html

Yep that's it!
Limited360
09-12-2013, 05:23 AM
Installed it today, went together mostly fine... had to modify some of the brackets so it bolted together easily (not enough material was trimmed on one bracket).

Also needed to use different bolts for the exhaust hangers, was barely getting it to thread by hand and did not like that..


A+ all around however... see how it is at highway speeds! I used to hear my old pro guard on another marauder slap on bumps. Side supports should sort that!