dash dress up

[345HP87SSAC]

Does anyone make anything to dress up the inside black surround under the gauges? That would look so goood with the gear shif t surround

[fastblackmerc]

Does anyone make anything to dress up the inside black surround under the gauges? That would look so goood with the gear shif t surround
The center gauge pod?

[345HP87SSAC]

No the gauges with the tach and speedo It would be ten to tweleve inches long and curved. It is so bland in that area.

[fastblackmerc]

Can you post a picture of where you are talking about?

[ctrlraven]

I think he is talking about the black trim piece that mounts on top of gauge cluster itself that divides each section up.

There isn't anything made that I have come across, you could always paint it but all along the top is the filters for illumination of the turn signal, O/D off, high beam, etc indicators.

[345HP87SSAC]

I could text it to you. I am talking about the area between the three gauges. On the bottom there is an area that does not have any gauges or lights that would be a thin piece. On the left side of the speedo it stops at 30mph and about 125 on the right. On the fuel gauge it stops at the full mark and on the tach side it stops around 5250 rpm.

I figure a small piece of brushed trim in that area would look sharp if mxed with the other goodies already made. I just do not want only the gear shift surround to be the only metal location.

[Embassy]

Are you talking about something like this:

http://www.ebay.com/itm/Ford-Crown-Victoria-95-00-Polished-Stainless-Gauge-Cluster-Speedo-Dash-Bezel-/140898089156?pt=Motors_Car_Tru ck_Parts_Accessories&hash=item20ce2e38c4&vxp=mtr (http://www.ebay.com/itm/Ford-Crown-Victoria-95-00-Polished-Stainless-Gauge-Cluster-Speedo-Dash-Bezel-/140898089156?pt=Motors_Car_Tru ck_Parts_Accessories&hash=item20ce2e38c4&vxp=mtr)

If so, I purchased one and painted it gloss black to add a subtle touch:
http://www.supermotors.net/getfile/751977/fullsize/img_6805.jpg

http://www.supermotors.net/registry/18556/70781

[ctrlraven]

The name of the part was escaping me in my previous post, gauge bezel is the correct term for it.

[DOOM]

It would be ten to tweleve inches long and curved.



THAT'S WHAT SHE SAID!!! :cool4:


:lol:

[RubberCtyRauder]

THAT'S WHAT SHE SAID!!! :cool4:


:lol:

Shouldn't you be on the track about now at Atlanta Motor Speedway trying to blow yet another motor?:lol:

[345HP87SSAC]

gauge bezel Yes the lower portion of this. If someone could make the lower portion of this it would tie in with the shfit surround and maybe even pedals ect.

[345HP87SSAC]

I was thinking only the bottom out of metal. Will the 95-00 version work for an 03?