Back glass seal

[GODFATHER]

has any of you had to replace the rear glass seal on the back window on mine for some reason the bottom part was cut off and pulled off the bottom of the glass
i just bought the car

http://i131.photobucket.com/albums/p309/svtcobrabrett/glas_zpsd955eeb0.jpg (http://s131.photobucket.com/user/svtcobrabrett/media/glas_zpsd955eeb0.jpg.html)

http://i131.photobucket.com/albums/p309/svtcobrabrett/dfg_zps6b05357d.jpg (http://s131.photobucket.com/user/svtcobrabrett/media/dfg_zps6b05357d.jpg.html)

[larryo340]

That molding normally comes on the glass and I'm not sure if it's available separately ...you can check your local dealer or maybe a glass shop that may have it from a broken rear glass.

[NavySeabee]

I've had to re-glue mine, same area. I've noticed quite a few Marauders at MV9 with the strip sagging and becoming unglued. Always seems to be the passenger side.

Maybe someone can chime in with a part #?

[GODFATHER]

Thanks for the reply,

if you get a chance one day and shoot a good picture of yours so that i can see what it supposed to look like maybe i can fab one.. there is no fomoco/ford part number that i can find and would hate to try to attempt it ..would have to have safelite glass do it :beer:

[GODFATHER]

I've had to re-glue mine, same area. I've noticed quite a few Marauders at MV9 with the strip sagging and becoming unglued. Always seems to be the passenger side.

Maybe someone can chime in with a part #?

i hope so.. i never seen anything like it and i guess they use a strong epoxy for it to adhere to the glass maybe i can find something at lowes like a bottom door seal/swiper

[screamn]

I've had to re-glue mine, same area. I've noticed quite a few Marauders at MV9 with the strip sagging and becoming unglued. Always seems to be the passenger side.

Maybe someone can chime in with a part #?

Plus 1 on this^^^^^

Mine did the same thing and I glued it too.

[ctrlraven]

Yep mine sags on the passenger side, waiting for warmer weather to clean the channel and then re-glue it.

[GODFATHER]

here is the part # f2my5442404a

just have to figure out if the window has to come out ...jeeezzz

[NavySeabee]

i hope so.. i never seen anything like it and i guess they use a strong epoxy for it to adhere to the glass maybe i can find something at lowes like a bottom door seal/swiper

I used a sealant that was recommended on this forum for this problem. It was thinner than regular sealant made to ooze down into cracks. I need to redo mine. Dont think I cleaned the old glue out enough. Mine is sagging again.


Sent from my SGPT12

[NavySeabee]

here is the part # f2my5442404a

just have to figure out if the window has to come out ...jeeezzz

Thanks

Sent from my SGPT12

[Richy04]

That is glued to the glass, you can use clear silicone to reattach it. No need to order a new one. The original is bonded to the edge of the glass but with a little UV and water intrusion over the years it loosens up. clean the edge of the glass and the channel and rebond it with clear silicone. Prop something underneath it to hold it tight to the glass till it dries. Richy

[gdsqdcr]

Mine started to sag, so I went to my local Safelight. They came out, cleaned it, glued it and sent me on my way. No charge.

[GODFATHER]

That is glued to the glass, you can use clear silicone to reattach it. No need to order a new one. The original is bonded to the edge of the glass but with a little UV and water intrusion over the years it loosens up. clean the edge of the glass and the channel and rebond it with clear silicone. Prop something underneath it to hold it tight to the glass till it dries. Richy

the problem is the meatball i bought the car from cut it off :confused: and threw it away

[gdsqdcr]

the problem is the meatball i bought the car from cut it off :confused: and threw it away

I wonder if your local safelight might have a piece. Not sure how universal they are, but if they don't, they may know a place that does.

[GODFATHER]

I wonder if your local safelight might have a piece. Not sure how universal they are, but if they don't, they may know a place that does.

safelite told me that they don't repair them anymore they only replace them.. got a quote for 280.00 plus mobile service to come out to the house 35.00

then the cost to re-tint the window will cost 75.00

Nothing is cheap anymore:mad2:

so i have to find a way to fix this

im beginning to believe this car had one of them landau roofs and was taken off

[RoyLPita]

safelite told me that they don't repair them anymore they only replace them.. got a quote for 280.00 plus mobile service to come out to the house 35.00

then the cost to re-tint the window will cost 75.00

Nothing is cheap anymore:mad2:

so i have to find a way to fix this

im beginning to believe this car had one of them landau roofs and was taken off

If your GM had a landau roof, there would be holes from the bolts to help mount it in place.

[GODFATHER]

If your GM had a landau roof, there would be holes from the bolts to help mount it in place.

the car was repainted so its hard to tell but who ever painted it sure did a nice job

http://i131.photobucket.com/albums/p309/svtcobrabrett/1800480_713734278648575_185024 2073_n_zps6e314626.jpg (http://s131.photobucket.com/user/svtcobrabrett/media/1800480_713734278648575_185024 2073_n_zps6e314626.jpg.html)

http://i131.photobucket.com/albums/p309/svtcobrabrett/1395158_713785588643444_163139 4450_n_zps0a8eae0d.jpg (http://s131.photobucket.com/user/svtcobrabrett/media/1395158_713785588643444_163139 4450_n_zps0a8eae0d.jpg.html)

http://i131.photobucket.com/albums/p309/svtcobrabrett/1782034_713730078648995_307520 232_n_zps006e926d.jpg (http://s131.photobucket.com/user/svtcobrabrett/media/1782034_713730078648995_307520 232_n_zps006e926d.jpg.html)

http://i131.photobucket.com/albums/p309/svtcobrabrett/1601120_713728458649157_179287 3412_n_zpsc2bcff82.jpg (http://s131.photobucket.com/user/svtcobrabrett/media/1601120_713728458649157_179287 3412_n_zpsc2bcff82.jpg.html)

[Richy04]

the problem is the meatball i bought the car from cut it off :confused: and threw it away

Sorry, thought you still had the moulding.. Go to the junk yard and peel one off of another rear window. It can come off in one piece but you have to start from the bottom and work it off. It is around the glass and not bonded to the window channel where the glass sits.. I checked this out because I am reshooting my roof and hood when the weather breaks and I want to remove that and the front one and with coaxing, it will come off. The warmer you can make it, the more pliable it becomes. Thus easier to take off..

[GODFATHER]

Sorry, thought you still had the moulding.. Go to the junk yard and peel one off of another rear window. It can come off in one piece but you have to start from the bottom and work it off. It is around the glass and not bonded to the window channel where the glass sits.. I checked this out because I am reshooting my roof and hood when the weather breaks and I want to remove that and the front one and with coaxing, it will come off. The warmer you can make it, the more pliable it becomes. Thus easier to take off..


great thanks;)
well this sounds good and found one on ebay but says it dont fit makes no sense to me are these different than the vic;s... what adhesive do i use

http://www.ebay.com/itm/FORD-F2MY5442404A-GENUINE-OEM-FACTORY-ORIGINAL-REVEAL-MOLDING-/201036442562?pt=Motors_Car_Tru ck_Parts_Accessories&hash=item2eceb4abc2&vxp=mtr

[Richy04]

You can use contact cement or silicone. Go grab one off of a junkyard car. Gm,cv or marauder

[Mac-MerC]

You can use contact cement or silicone. Go grab one off of a junkyard car. Gm,cv or marauder

LOL @ junkyard Marauder. I'm waiting to see one of those not on Copart