Restoring headlights

[adrian3691]

Can I restore my headlights looking like if so what kind of sand paper and other materials would I need


Sent from my iPhone using Tapatalk

[adrian3691]

http://img.tapatalk.com/d/14/05/31/tudejy5u.jpg


Sent from my iPhone using Tapatalk

[Baconbit]

Get a couple 3m variety packs like I did starting with about 400 grit and wet sand clear down to 2000 grit. Then get U-Pol Clear and do a few coats of that. You can then leave it like that or wet sand with 2000 or 2500 grit then use a polishing compound and then pow you are done. They will look brand new unless the damage is on the inside.

[lji372]

Get a couple 3m variety packs like I did starting with about 400 grit and wet sand clear down to 2000 grit. Then get U-Pol Clear and do a few coats of that. You can then leave it like that or wet sand with 2000 or 2500 grit then use a polishing compound and then pow you are done. They will look brand new unless the damage is on the inside.

^^^^^^^^^^^^^^^^^^^^

[adrian3691]

:-)


Sent from my iPhone using Tapatalk

[Loco1234]

Yah 3m sells a KIT to restore headlights... it does work well... but does require some elbow grease...

There are cheaper headlight restore kits.... but remember like anything u get what u pay for...

[Granddaddy Marq]

I have had no luck trying to restore my lights. They have the same little cracks. You can polish it but the cracks don't come out.

[sailsmen]

http://www.mercurymarauder.net/forums/showthread.php?t=82582

[2mercs]

Usually the the tiny cracks are on the inside of the lens. Don't think they can be fixed. Can always separate the light and replace the lenses with ones from a marquis.

Sent from my toaster using tapatalk

[grandepau00]

Wet sandpaper, buffer, compound, wax, done.

Sent from my XT1031 using Tapatalk