Spring Sale

[Dennis Reinhart]

OK I would like to offer a group sale on the exhaust I will sell the kit for 900.00 plus shipping* for a group of five each.

Tuners are on sale till the end of April for 350.00 with three programs.*

Chips are on sale for 300.00.*

Sway bars for a group of five are 200.00 plus shipping*

Denso plugs are 85.00.*

Transmission cooling kits are 325.00.*

Level 2 Transmission kits are 475.00.*

PI 3000 Stall converters 725.00* for a group buy of five at a time.

Vortech S/C kit call for pricing.

In addition KVR is making a comparable brake rotor to the bear kit, I will keep you posted on this.

[Ross]

Dennis, this sounds like a real good deal, so maybe it's time for me to bite the bullet on an exhaust. Can you run down again everything that comes with the exhaust? I know it's the ported Cobra manifolds, High flow cats, and X pipe, but I'm not sure if the manifold is ceramic coated, and if I use the stock ehhaust pipe to hook into the manifold. Also, do new gaskets come with the kit? Do you suggest investing in a set of new aftermarket manifold bolts to replace the stock studs? Is this whole thing bolt on, with no welding? I think I am about there!

[BruteForce]

I'm in for one each of the following:

Transmission cooling kits are 325.00.

Level 2 Transmission kits are 475.00.

PI 3000 Stall converters 725.00 for a group buy of five at a time.

[Dennis Reinhart]

The exhaust High flow maniflods are ceramic coated, it comes with every thing, and its a bolt in NO WELDING

[SergntMac]

Dennis, this sounds like a real good deal, so maybe it's time for me to bite the bullet on an exhaust. Can you run down again everything that comes with the exhaust? I know it's the ported Cobra manifolds, High flow cats, and X pipe, but I'm not sure if the manifold is ceramic coated, and if I use the stock ehhaust pipe to hook into the manifold. Also, do new gaskets come with the kit? Do you suggest investing in a set of new aftermarket manifold bolts to replace the stock studs? Is this whole thing bolt on, with no welding? I think I am about there!
Ross, if I may...

Reinhart's Cobra kit includes everything you need, up to the factory muffler inlet. The manifold is "jet coated" and apprears a brite stainless finish. The tail pipe is one piece, with two high flow cats and X pipe in place. there are 4 O2 sensor bungs, and I used my OEM bolts and gaskets all around. I needed to add nothing to the kit. Unless Dennis has changed something, the kit will mate to your OEM 2" OD mufflers. Install time on a lift was about two hours, any muffler jockey will do. Hope this helps, happy motoring.

[Ross]

Thanks guys, I need this kit. About the O2 sensor bungs, do our cars have 4 O2 sensors to hook up to these? If we only have 2 O2 sensors, do we just plug up the other 2 or what? I know this is elementary to a lot of you, but I haven't dug into any exhausts in many years, and they have changed since then.

[Marauderman]

uh....re-read Sarge's post above your last post--......answers there!

[Ross]

Gave Dennis a call, got mine on order. Come on y'all, we need 5 guys to order to get the sale price!

[NickLee]

Count me in on the exhaust system, already called Dennis, great guy to talk to.
Thanks Dennis for the great price. :banana:

[Ross]

That's 2---need 3 more...

[bugsys03]

Count me in for the exhaust :beer:

[BULLDOGINU]

I'm in for an exhaust system

[HwyCruiser]

I'll make it 5 for the exhaust...

bugsys03 and BULLDOGINU, we need to make our calls to Dennis.

- JD

[BULLDOGINU]

I'll call first thing in the morning

[junehhan]

Out of curiosity, what is the exhaust made of? Is it heavy duty T304 Stainless, regular stainless steel, aluminized steel?

Also, what does the Level 2 transmission kit upgrade?

[03SILVERSTREAK]

OK I would like to offer a group sale on the exhaust I will sell the kit for 900.00 plus shipping* for a group of five each.

Tuners are on sale till the end of April for 350.00 with three programs.*

Chips are on sale for 300.00.*

Sway bars for a group of five are 200.00 plus shipping*

Denso plugs are 85.00.*

Transmission cooling kits are 325.00.*

Level 2 Transmission kits are 475.00.*

PI 3000 Stall converters 725.00* for a group buy of five at a time.

Vortech S/C kit call for pricing.

In addition KVR is making a comparable brake rotor to the bear kit, I will keep you posted on this.That sounds like one hell of a deal... :banana2:

[Marauder57]

All of those are great prices....You will enjoy the mods on your MM....the Exhaust is great!

:up:

[Murader03]

As much as I'd really like to take advantage of the cost saving that would take place on this order, I'm gonna have to pull my name from the sale list at this time. Drats! I could really do with the savings, but it just isn't going to happen this month........

[Ross]

Sounds like 5! Me, Bugsys03, NickLee, Bulldoginu, and HwyCruiser.

Done deal, Dennis! Can't wait for more power!

[GordonB]

Dennis,
Pls sign me up for 1 rear sway bar.
I'll followup with a phone call order shortly.
GordonB :banana2:

[HwyCruiser]

Sounds like 5! Me, Bugsys03, NickLee, Bulldoginu, and HwyCruiser.

Done deal, Dennis! Can't wait for more power!

Called Dennis at 4:30 p.m. CT. We only have 4 confirmed for the first 5 exhaust group.

Come on down off the fence. We need 1 more taker!

- JD

[MarauderMark]

OK I would like to offer a group sale on the exhaust I will sell the kit for 900.00 plus shipping* for a group of five each.

Tuners are on sale till the end of April for 350.00 with three programs.*

Chips are on sale for 300.00.*

Sway bars for a group of five are 200.00 plus shipping*

Denso plugs are 85.00.*

Transmission cooling kits are 325.00.*

Level 2 Transmission kits are 475.00.*

PI 3000 Stall converters 725.00* for a group buy of five at a time.

Vortech S/C kit call for pricing.

In addition KVR is making a comparable brake rotor to the bear kit, I will keep you posted on this.




Dennis can i be in on some of these things as well?

[Fahad_H]

Transmission cooling kits are 325.00.*

Level 2 Transmission kits are 475.00.*



What do these kits consist of ?


Thanks,

[Ross]

Fahad, check out this post:


http://www.mercurymarauder.net/forums/showthread.php?t=7316

[Ross]

Do we have 5 orders confirmed for the exhaust yet? (waiting breathlessly for more power)

[BULLDOGINU]

I called Wednsday morning, Dennis said I was the 4th order. He will send them out as soon as we get the 5th.

[the_pack_rat]

[QUOTE=Dennis Reinhart]

Tuners are on sale till the end of April for 350.00 with three programs.*

===========================


Dennis,

The tuner you are refering to ...

Is this the newest custom tuner ?.

Regards,

Eric < --- might have to sell his 1725 tuner for this one

[Ross]

Do we still have 4 or did the fifth order get called in?

[Ross]

Making my daily check. Did the fifth order ever get called in?

[Dennis Reinhart]

Yess Ross your set leaves today

[Ross]

Great! Thanks for the good deal, Dennis. :up:

[gonzo50]

Do we have 5 orders confirmed for the exhaust yet?
Are the 18" Magnaflows included in this or how much more would that be ?

[Dennis Reinhart]

No but they can bee can some one give me a part #

[MarauderMark]

No but they can bee can some one give me a part #

Are they included with my order or not at all ..if not can you please add them Great sound!!!!

[bugsys03]

Exhaust arrived today :D looks awesome, cant wait to install

[BUCKWHEAT]

The exhaust High flow maniflods are ceramic coated, it comes with every thing, and its a bolt in NO WELDING
Dennis is right. His kit is bolt-up. When I installed mine i finished the whole job and drove it to the muffler shop, spent $100, and had them weld in the bigger pipe from Dennis' kit extensions into my Flowmaster 50's. The result was the bigger pipe all the way into the mufflers. Don't know if it really helped but it looks cool.

[HwyCruiser]

Got my Cobra exhaust in today... bolting on next Tuesday :rock:

Thanks Dennis

- JD

[junehhan]

Does anyone have any pictures of the DR exhaust?

[gonzo50]

In addition KVR is making a comparable brake rotor to the bear kit, I will keep you posted on this.
Any update on these yet ? Thanks. :cool:

[Trouper]

"OK I would like to offer a group sale on the exhaust I will sell the kit for 900.00 plus shipping* for a group of five each."

Dennis, is this a Marauder specific kit, or will it fit my 99 Crown Vic HPP also?

Here is a link to Dennis's thread of the system:
Dennis's Exhaust Pics (http://www.mercurymarauder.net/forums/showthread.php?s=&threadid=2828)

[Ross]

My mechanic said that my exhaust arrived. Just have to find the time to get over there and get it installed.

[Dennis Reinhart]

"OK I would like to offer a group sale on the exhaust I will sell the kit for 900.00 plus shipping* for a group of five each."

Dennis, is this a Marauder specific kit, or will it fit my 99 Crown Vic HPP also?

Here is a link to Dennis's thread of the system:
Dennis's Exhaust Pics (http://www.mercurymarauder.net/forums/showthread.php?s=&threadid=2828)

http://www.mercurymarauder.net/forums/showthread.php?t=9390&goto=newpost

[DL04]

Stage 1 ordered on the 22nd received on the 26th + 27th thanks Dennis!
Now I just have to make arrangements with the wrench guy..

[studio460]

Dennis:

Is it too late for the $900 group buy on the Cobra manifold exhaust system (first batch of five)? Can I still get in for the sixth order, or would I need to wait for four more orders at this point? Thanks.

[Dennis Reinhart]

Dennis:

Is it too late for the $900 group buy on the Cobra manifold exhaust system (first batch of five)? Can I still get in for the sixth order, or would I need to wait for four more orders at this point? Thanks.
Call me Monday

[studio460]

Thanks, Dennis--I'm still just deciding on my exhaust for now, but I think there was another member who still wanted in on the Cobra manifold group buy.

[Dennis Reinhart]

Well I orderd 2 I got ten if any one would like these I will sell them for 180.00
It will save me sending them back