I broke something....

[PuntyMario]

I had a plan. loosen grill to remove headlight assembly. i did that. but upon re tightening the bolts for the grill this happened :mad2:
http://i.imgur.com/7aL2jYul.jpg

that is supposed to be attached to the grill and now its not. i didnt even use very much pressure when screwing the bolt back in. hell i didnt even get a chance to screw it in. i was just putting it on and plink it breaks off and falls to the ground. ;saodjghbna;i'odskfgjuhbi'odsk

[RubberCtyRauder]

One broke on my badge less grille. Epoxy it back together . Have to take grille out and I added some to each tab to hopefully strengthen it

[PuntyMario]

One broke on my badge less grille. Epoxy it back together . Have to take grille out and I added some to each tab to hopefully strengthen it

thats a good idea. to keep the other ones from suffering the same fate.

[loud2004marquis]

I highly recommend this stuff to fix it:

http://www.jbweld.com/wp-content/uploads/2012/08/WaterWeld-Putty.jpg

[PuntyMario]

I highly recommend this stuff to fix it:

http://www.jbweld.com/wp-content/uploads/2012/08/WaterWeld-Putty.jpg

thanks ill check it out

[myrodr]

abs plastic cement at lowes may also work

[2mercs]

Find someone with a plastic welder. Had a tab on my switch panel fixed that way. Seems stronger than before.

Sent from my toaster using tapatalk