EATON PARTS FROM 2004 COBRA

[JoeBoomz]

$2200 OBO.

Last year I bought a complete Cobra engine pull from a 2004 Cobra, to use the longblock in my Vortech Marauder. For sale is everything that I got in the package, except the longblock itself, which I used in my car. I AM NOT INTERESTED IN PARTING OUT AT THIS POINT IN TIME.

http://images.ioncross.com/mercurymarauder.net/08-21-2013-JOEBOOMZCobraMotor/2-IMG_5881.JPG


The main parts of interest that are included are:
- Eaton blower with stock elbow and TB
- Lower intake
- Stock Intercooler
- Cobra front timing cover with all factory pulleys, tensioners, pulley bridge
- Cobra alternator and brackets
- Cobra intake tube, MAF, and filter (included but not shown in these pics)
- Cobra cooling COT (Cross Over Tube)
- Cobra dual crank pulley and bracket
- 39# Cobra fuel injectors
- Cobra fuel rails
- Wiring harnesses

The parts have been cleaned up much nicer than that top picture; here's some shots of them all taken off the motor:

http://images.ioncross.com/mercurymarauder.net/08-21-2013-JOEBOOMZCobraMotor/21-IMG_5925.JPG



http://images.ioncross.com/mercurymarauder.net/08-21-2013-JOEBOOMZCobraMotor/22-P1010534.JPG



http://images.ioncross.com/mercurymarauder.net/08-21-2013-JOEBOOMZCobraMotor/24-P1010536.JPG
Note the chip on the intake elbow - this will be covered up completely by the intake tube and will not affect performance or reliability whatsoever.


The Eaton has an upgraded non-slip pulley of some sort; sorry guys I don't know my Eatons very well and can't say exactly what it is.
http://images.ioncross.com/mercurymarauder.net/08-21-2013-JOEBOOMZCobraMotor/10-P1010509.JPG


Here's a video of the actual blower running, zero issues (I have never used it myself but it spins nicely)

LeChIdO8GC4 XdL66Zrj99I
NOTE: The guy shorted me the nice aftermarket intake tube, MAF and filter. Instead I have a stock (black) Cobra intake tube, Cobra MAF and conical filter.

Also, I did NOT get the cobra aftercooler, so there is not one included with this package.


UPDATE SEPT 14: Here's some more pics of the parts, I took these to post it on eBay.
http://images.ioncross.com/mercurymarauder.net/09-14-2014-EatonParts/P1050310.JPG

Note, that's an actual K&N CAI.

SAVE ON SHIPPING - if you don't need or won't use some of the heavier pieces like the starter, AC compressor, alternator, Cobra Exhaust manifolds, EGR tube, or steering pump, let me know and I won't ship them. They add a ton of weight and those parts alone will probably cost another $100 to ship.




Full Cobra engine harness, you'll need some of these plugs to get everything going in your Marauder.

http://images.ioncross.com/mercurymarauder.net/09-14-2014-EatonParts/WP_20140914_008.jpg




And the rad hoses and thermostat, don't know if they'll be much use to someone installing this in Marauder, but there you have it.

http://images.ioncross.com/mercurymarauder.net/09-14-2014-EatonParts/WP_20140914_011.jpg


The Cobra timing cover is also included, exactly as shown here:
http://images.ioncross.com/mercurymarauder.net/08-21-2013-JOEBOOMZCobraMotor/40-IMG_5983.JPG

http://images.ioncross.com/mercurymarauder.net/10-05-2013-EnginePull/IMG_6492.JPG



Any questions? Please do not hesitate to contact me.

[JoeBoomz]

Friday bump.

Will post on eBay in a week or so at the 3k market price. I first wanted to offer mm.net members first crack at 10% cheaper here.

[JoeBoomz]

Bump - back to the top.

[JoeBoomz]

I'd really like to see this go to a MM.net member. And not post it on eBay. Anyone interested at 2200?

[Mac-MerC]

FML

This is a good ass deal

[BeanSS]

****!!! I wish you took lay-away payments!!!

[JoeBoomz]

Another bump. Looks like I'll have to photo shoot all the bits and post it on eBay. Need to pay for my upcoming vacation!

[Will 1981]

Is this all the parts for the swap and how much for shipping? Oakland Ca 94605

[JoeBoomz]

Is this all the parts for the swap and how much for shipping? Oakland Ca 94605



Depends how you decide to run the alternator, but this gets you most of the way there. You will need an aftercooler, pump and tank for the eaton as well to redo your radiator piping. I'd review the eaton swap threads to be sure. You will also spend time rewiring your harness but I will include the cobra harness for the plugs you need.


Shipping will likely be above 100. But I will get you an actual quote shortly. Still have to figure out how many boxes and what size in order to keep the weight down.

[Will 1981]

How do I send a pm

[Will 1981]

Sent you a pm

[JoeBoomz]

Updated first post:



UPDATE SEPT 14: Here's some more pics of the parts, I took these to post it on eBay.
http://images.ioncross.com/mercurymarauder.net/09-14-2014-EatonParts/P1050310.JPG

Note, that's an actual K&N CAI.

SAVE ON SHIPPING - if you don't need or won't use some of the heavier pieces like the starter, AC compressor, alternator, Cobra Exhaust manifolds, EGR tube, let me know and I won't ship them. They add a ton of weight and those parts alone will probably cost another $100 to ship.




Full Cobra engine harness, you'll need some of these plugs to get everything going in your Marauder.

http://images.ioncross.com/mercurymarauder.net/09-14-2014-EatonParts/WP_20140914_008.jpg




And the rad hoses and thermostat, don't know if they'll be much use to someone installing this in Marauder, but there you have it.

http://images.ioncross.com/mercurymarauder.net/09-14-2014-EatonParts/WP_20140914_011.jpg


The Cobra timing cover is also included, exactly as shown here:
http://images.ioncross.com/mercurymarauder.net/08-21-2013-JOEBOOMZCobraMotor/40-IMG_5983.JPG

http://images.ioncross.com/mercurymarauder.net/10-05-2013-EnginePull/IMG_6492.JPG




I'm at 2200 firm, plus shipping. This is a good deal for the hardware with a video of it running.

Buy with confidence - I have perfect feedback on eBay (user JoeBoomz) and have never had a deal go bad on mm.net. (knock on wood)
:banana2:

[Will 1981]

Ill take it

[JoeBoomz]

Ill take it

Thank-you - SOLD pending payment.

[JoeBoomz]

Sold - thanks everyone for your interest.