HID fog light plug adapter

[88CuttyClassic]

The HID kit doesnt appear to be plug n play because the ford fog light plug is smaller than the universal female plug on the HID ballast. Im not familiar with plug sizes and connectors so i dont know what to look up as far as an adapeter. I would need a small female end that accepts the ford fog light plug - to- a universal weatherpack plug. After that i should be good to go

[slickster]

I just cut and spliced the factory harness to the new hid harness

[Ourobos]

I didn't cut my factory wiring but used the wire taps to tie into them, in case I ever wanted to remove them.

[fastblackmerc]

When I convert fogs to HIDs I colder and heat shrink tube the factory harness to the ballast. If you use taps you'll be repairing them frequently because of this location.

[fastblackmerc]

The HID kit doesnt appear to be plug n play because the ford fog light plug is smaller than the universal female plug on the HID ballast. Im not familiar with plug sizes and connectors so i dont know what to look up as far as an adapeter. I would need a small female end that accepts the ford fog light plug - to- a universal weatherpack plug. After that i should be good to go

No such adapter.

Send me your harnesses and pay for return shipping and I'll solder the correct connectors on.