Chin spoiler

[airjordan2k8]

Quick question marauder fam.. will this one work on our cars.? 40852

Sent from my SCH-S968C using Tapatalk

[fastblackmerc]

Yes that one will work.

[Bad_S55]

Yes that one will work.

Is there a kind that doesn't work?

[fastblackmerc]

Is there a kind that doesn't work?

Don't know if anyone has tried a different one.

You can be the first!

[airjordan2k8]

Yes that one will work.

Thanks fbm they say it comes as is and not folded so even better..

Sent from my SCH-S968C using Tapatalk

[NavySeabee]

Quick question marauder fam.. will this one work on our cars.? 40852

Sent from my SCH-S968C using Tapatalk

Same one I have. Looks good. I need to "refresh" the fasteners" after 2 years.

Anyone ever paint their chin spoiler? Mine's fading.

[Marauder24]

Yep that the same one I used

[airjordan2k8]

Yep that the same one I used

Did yours come with holes? ?

Sent from my SCH-S968C using Tapatalk

[airjordan2k8]

Same one I have. Looks good. I need to "refresh" the fasteners" after 2 years.

Anyone ever paint their chin spoiler? Mine's fading.

What fastners did you use? ?

Sent from my SCH-S968C using Tapatalk

[camelgrundle]

1/4 inch push pins for the win. Also used 3 small self tapping screws to hold it in place for the push pins. Gotta drill holes in the bottom of the bumper for the push pins.

[345HP87SSAC]

On my list to do now that the car's paint is back up to standard.

[MERCULES]

Is there a kind that doesn't work?

Well I thought the same thing. I purchased my Marauder used and there was one in the trunk with the mounting kit. I took it to have it installed at an auto glass shop and they did not want to drill holes, and recommended against that?

So now my question is do I have the wrong one or do they all need to be drilled. Does the proper one line up with existing holes?

It looks to be the correct length etc. :confused:

[camelgrundle]

You have the right one.

[TP Derrick D]

Well I thought the same thing. I purchased my Marauder used and there was one in the trunk with the mounting kit. I took it to have it installed at an auto glass shop and they did not want to drill holes, and recommended against that?

So now my question is do I have the wrong one or do they all need to be drilled. Does the proper one line up with existing holes?

It looks to be the correct length etc. :confused:
Put the spoiler centered up against the front air dam and adjust as needed, hold in place w/ tape etc, drill the center hole put in screw to hold in place then drill on each end and put in screws, do the rest, simple.
Drill the holes and put it on w/ 1/4" screws and nuts and stand back and take it the beauty of how much better it looks. For me I won't own a Marauder without one...2 Marauders owned- 2 Marauders w/ chin spoilers owned..& trunk wing also.
As far as the screws, on my 1st Marauder the chip spoiler came with push pin type. At high speeds they pulled out and luckily the end push pins held. So I got the screws & bolts and replaced all push pins, On 2nd Marauder the chin spoiler seller gave a option of push pins that came with it no extra cost or metal screws & bolts for extra cost...you already know which way I went.. JUST DO IT!!! End results will be...:bows:

[camelgrundle]

I have gone 140+ (in Mexico) and no prob with my push pins. And 3 little self tapping screws.

[TP Derrick D]

I have gone 140+ (in Mexico) and no prob with my push pins. And 3 little self tapping screws.

You got good ones or was lucky or maybe you just go that fast once. I go that fast often and they pulled out so I won't use push pins.

[camelgrundle]

Yeah I don't know mine are locked in place. I tried pulling on it after install because I heard bad stories. Maybe mine are just awesome lol.

[airjordan2k8]

I finally got mine on it looks badass, is it supposed to be a little wavy?

Sent from my SCH-S968C using Tapatalk

[TP Derrick D]

I finally got mine on it looks badass, is it supposed to be a little wavy?

Sent from my SCH-S968C using Tapatalk
If it came rolled up in a box you might needed to let it lay in sun but since its on already the sun should help with that, at least on my 1st car it did.

[airjordan2k8]

If it came rolled up in a box you might needed to let it lay in sun but since its on already the sun should help with that, at least on my 1st car it did.

It didn't come folded or anything.. so ill just let the sun do the job.. ill upload a pic tomorrow...

Sent from my SCH-S968C using Tapatalk

[TP Derrick D]

It didn't come folded or anything.. so ill just let the sun do the job.. ill upload a pic tomorrow...

Sent from my SCH-S968C using Tapatalk

Notice U'r in the HEB-cities, I'm in Mansfield/S. Arlington. A member, LG88 was talking of doing a Marauder meet-up( Welcome area) and was talking about today but not sure if anything happened because of the possibility of rain. I texted him at 4pm but got no response so not sure if anything happened but look for upcoming things to happen if this area is serious enough.

[airjordan2k8]

Notice U'r in the HEB-cities, I'm in Mansfield/S. Arlington. A member, LG88 was talking of doing a Marauder meet-up( Welcome area) and was talking about today but not sure if anything happened because of the possibility of rain. I texted him at 4pm but got no response so not sure if anything happened but look for upcoming things to happen if this area is serious enough.

Yea I had got a pm a few days b4 sunday saying they were gonna meet up.. but I had a few things to do.. and I live in irving.. hopefully something happens...

Sent from my SCH-S968C using Tapatalk

[airjordan2k8]

Heres that pic tho.. see I'm talking about the curvy areas close to the fogs. . 40983

Sent from my SCH-S968C using Tapatalk

[TP Derrick D]

Heres that pic tho.. see I'm talking about the curvy areas close to the fogs. . 40983

Sent from my SCH-S968C using Tapatalk

Yeah that's how my first one looked. Its still good to go. Way better than without it. I think its just a difference in the manufactures. Probably the most perfect ones are off an actual Mach 1. I used to live in Irving '93-'96 off Beltline and Walnut Hill passed Country Club. Your location says Euless so I was going by that.

[Marawder]

Tried to upload the pictures of the spoiler, but can't get a good look at it. I installed a 2003 Mach 1 chin spoiler on my MM. It jut forward across the front of the car, then as it turns under the bumper towards the wheels, it flattens out. The guy at my bodyshop ( I work at a Ford/Lincoln/SVT dealer) used the mounting points from the bumper and didn't need to make hardly any mods to get it installed. And because it's flexible, I have been fortunate when pulling up to the odd high-curb that it hasn't broken or caused any damage.

[MGDriver]

I would love a chin spoiler and trunk wing on mine but the postage to Europe for those parts are insane, have to save up some more.