2012 shelby supercharger

[Flbatfish]

I have the opportunity to buy the complete 2012 shelby 5.4 supercharger. Everything except the intake and blower drive components. The parts were removed and have less that 100 miles on them.

Does anyone know what components Ill seed to put this supercharger on my Marauder?

[Flbatfish]

http://images.craigslist.org/00G0G_7c46vWBaMZS_600x450.jpg

These are the parts

[MOTOWN]

None of that will fit your car.

[BigM460]

I thought Jokerz performance made the parts to bolt on those superchargers?

[MOTOWN]

I thought Jokerz performance made the parts to bolt on those superchargers?

I have yet to see anything actually offered

[Bad_S55]

You'll also run into the problem of trying to mate a drive by wire throttle body to a cable setup. The only way I see that working is if you buy the rest of the engine, wiring harness, & computer to build a totally custom GT500 5.4 Marauder.

[mad1stgen]

Cobra Engineering offers an adapter plate to bolt the 07-14 blowers to the 03-04 cobra lower intake/IC so yeah it's definitely doable.

You don't use the DBW, but a standard cable TB with the adapter that comes with the kit.

The only part you can really use from that picture is the supercharger itself, and the elbow. The heat exchanger is nothing special, frozen boost unit is much better. So unless you're paying under $500 for it, it's not worth it as the supercharger is worth about that.

edit: added link http://www.cobraengineering.net/adapter.html

[sflrainmaker01]

Will that setup clear the stock Marauder hood?

[Bad_S55]

Will that setup clear the stock Marauder hood?

Even if it doesn't, you could always get a cowl or a domed hood.
http://www.classglassperformance.com/merc%20cr%20vic.html

[jwibbity]

Even if it doesn't, you could always get a cowl or a domed hood.
http://www.classglassperformance.com/merc%20cr%20vic.html

and worry whether you'll have to take it to a body shop to fix the hood...... a couple people have run into issues with their quality

[MOTOWN]

and worry whether you'll have to take it to a body shop to fix the hood...... a couple people have run into issues with their quality

Any fiberglass panel is going to need prep work prior to paint , I've had Harwood , and other brands , fiberglass requires a different type of prep over a steel body panel.

[rauder88]

I'm not worried about the hood so much, but will this clear our wiper cowl?

[Jokerzl]

I tryed to get someone to try the cobra engineering kit but that never went through.

You need a cobra eaton swap done and you will be able to run a TVS or m122


Sent from my iPhone using Tapatalk