Eaton rebuild

[slickster]

Where's a good place to have my eaton rebuild?

[chief455]

jonbondperformance.com

the end

[BUCKWHEAT]

He did a job on my M112 & it added PSI and HP.

[jwibbity]

Joker does rebuilds and ports, probably cheaper than the above mentioned guys..

[chief455]

I believe all 3 would be good choices for a rebuild, and/or porting.

[martyo]

jonbondperformance.com

the end

I concur.

Or you can send it to Magnusson but they are $$$.

[burt ragio]

What is the usual charge for a rebuild & what does it involve ?

[martyo]

What is the usual charge for a rebuild & what does it involve ?

It all depends on the condition of the blower when it is sent in. Rotors for example are expen$ive!

[chief455]

What is the usual charge for a rebuild & what does it involve ?

best is to visit the website, what is included detailed there, then contact them. I've sent clear pictures to Jon Bond and received a guesstimate reply.

[slickster]

Ok it's off to JB. Wondering if heat absorbing powder coat will make a difference? Will report back the results. Thanks

[slickster]

It's done. It was a mess so I did a full rebuild better then new better then oem. This is the powder coat job very happy. https://m.facebook.com/JonBondPerformance?refsrc=http s%3A%2F%2Fwww.facebook.com%2FJ onBondPerformance

[slickster]

SKF 20V47 Seal China 848420
SKF 6204ODGB bearing 848230 Argentina
SKF 6203ODGB Bearing Argentina 8482.10.50.68
Jon Bond Performance Supercharger oil with Tribodyn
Bearing retainer for Eaton rotor packs. Requires TIG weld in place. 741521 USA
JBP 22PTFEM33.3 AL Seal
JBP 22PTFEM34.9 AL Seal
INA 17.27 Drawn Cup Needle Bearing USA 848240
Eaton G5 rebuild kit. Fits Eaton OEM models that use open ended needle bearings 17x27.
Eaton brass butterfly plate 1.5"
Butterfly bolts
1.5" Brass butterfly with threadlocking bolts SKF 20mm Sleeve
eaton oil fill plug
bolts
M90/M112/MP90/MP112 supercharger gears LABOR - Ceramic rotor coating 7-9" rotors

[lji372]

Very cool!

Glad it's sorted buddy :beer:

[slickster]

Very cool!

Glad it's sorted buddy :beer:

So what do I have to do for a *** plate

[lji372]

So what do I have to do for a *** plate

??? What king of plate?

[slickster]

??? What king of plate?

One of them covers you showed me under the hood

[lji372]

One of them covers you showed me under the hood

Ah... That was the egr delete cover :D

[chief455]

It's done. It was a mess so I did a full rebuild better then new better then oem. This is the powder coat job very happy. https://m.facebook.com/JonBondPerformance?refsrc=http s%3A%2F%2Fwww.facebook.com%2FJ onBondPerformance
glad you went with our suggestion, nice blower

So what do I have to do for a *** plate
he-he - he said *** :D

[lji372]

So what do I have to do for a *** plate





glad you went with our suggestion, nice blower

he-he - he said *** :D

It's like getting a badge in boy scouts, you have to perform a task :eek:

[CoreyM75]

glad you went with our suggestion, nice blower

he-he - he said *** :D
Dude.
I have no idea what that means, all I
Can guess is that it's Eat At Dennys.
Kinda guessing here.

[MarauderMatt200]

LOL @ ***

it means eat a di** lol

[jwibbity]

SKF 20V47 Seal China 848420
SKF 6204ODGB bearing 848230 Argentina
SKF 6203ODGB Bearing Argentina 8482.10.50.68
Jon Bond Performance Supercharger oil with Tribodyn
Bearing retainer for Eaton rotor packs. Requires TIG weld in place. 741521 USA
JBP 22PTFEM33.3 AL Seal
JBP 22PTFEM34.9 AL Seal
INA 17.27 Drawn Cup Needle Bearing USA 848240
Eaton G5 rebuild kit. Fits Eaton OEM models that use open ended needle bearings 17x27.
Eaton brass butterfly plate 1.5"
Butterfly bolts
1.5" Brass butterfly with threadlocking bolts SKF 20mm Sleeve
eaton oil fill plug
bolts
M90/M112/MP90/MP112 supercharger gears LABOR - Ceramic rotor coating 7-9" rotors

How much did all that run you???

[Taemian]

He did a job on my M112 & it added PSI and HP.

+1 for Steigmeyer or however you spell it...bearings and polish job, no porting though.

[chief455]

It's like getting a badge in boy scouts, you have to perform a task :eek:
ewwww:depress:

Dude.
I have no idea what that means, all I
Can guess is that it's Eat At Dennys.
Kinda guessing here.

Engine Alteration Disorder

[babbage]

cearmic coating on the rotors is a nice touch. How does it run?