driver side valve cover removal

[truegraw]

any way of doing this without removing intake?

[Turbov6Bryan]

I saw in your other post, #6 was low on compression

You pulling the cover because oil is leaking down in the spark plug hole?

[fastblackmerc]

Yes you can remove both cam covers without removing the intake. Drivers side is easier than the passenger side.

[Comin' in Hot]

You need to remove the throttle body and maybe the idle air control valve.

[Zack]

You need to remove the throttle body and maybe the idle air control valve.

Just remove the upper lid and be done with it....much easier with it all off.

[justbob]

Just remove the upper lid and be done with it....much easier with it all off.


+1 ^^ using this and have your cover off in minutes.. The best tool in the box!
http://images.tapatalk-cdn.com/15/12/03/6193197c59c53592f2a686c4033535 c1.jpg


Builder Of Badassery

[Comin' in Hot]

+1 ^^ using this and have your cover off in minutes.. The best tool in the box!
http://images.tapatalk-cdn.com/15/12/03/6193197c59c53592f2a686c4033535 c1.jpg


Builder Of Badassery

I have this one

http://www.northerntool.com/images/product/700x700/414/41431_700x700.jpg

but I'm picking this one up this week.... I borrowed one for a day and I'm hooked, its lighter, its stronger and has a two way trigger.

http://i.ebayimg.com/00/s/MTA3MVgxNjAw/z/7VwAAOSwDNdV1Sbx/$_1.JPG?set_id=880000500F

[MOTOWN]

I have this one , no more hand cramps!

http://i1020.photobucket.com/albums/af324/sims36/Mobile%20Uploads/618_348_high-power-long-life-drills-dewalt-20v-max-lithium-ion-brushless-3-speed-1-4-inch-impact-driver_zpsgri7g8p9.jpg

[truegraw]

cool thanks, figured i would have a look to see if i can spot anything. guess im still old school with the sockets, maybe i can talk the wife into one oh never mind i got a bad cylinder i almost forgot lol

[Turbov6Bryan]

Everyone who posted the mini impacts, you guys rock!!!!

It reminded me to charge mine up for this weekend, I would have been a little upset with weak batteries.

I use a 18 volt dewalt 1/2 inch impact. It's a gift from the heavens :cool:

[JBeezy]

I have a craftsman 1/2" battery operated impact that I do not think very highly of. Bought it to swap wheels at the track on my mustang. Failure!!!!