Page 4 of 14 FirstFirst 1234567891011 ... LastLast
Results 46 to 60 of 200

Thread: The Bo0sted Bastard

  1. #46
    Join Date
    Dec 2014
    Location
    Hastings, mi
    Age
    43
    Posts
    344
    Yeah I watch his vids. I believe that one was a Gen3 rotating assembly. Not nearly as strong as the gen4. Thankfully my 2005 Gen3 has gen4 rods factory.
    Last edited by cheapthrillb2; 01-12-2019 at 09:16 AM.
    2003 budget built marauder-LM7 5.3 SBE 4L80E VS racing 78/75 turbo and other things
    1.56 60' 6.80 1/8 @ 104 mph 10.5 1/4 @129 mph
    #BSTDMRC #LSSWAPPEDMARAUDER
    Instagram -
    Cheapthrillb2
    lsswappedmarauder

  2. #47
    Join Date
    Dec 2014
    Location
    Hastings, mi
    Age
    43
    Posts
    344
    Another spare drivetrain lol.... $800.
    Attached Images Attached Images
    2003 budget built marauder-LM7 5.3 SBE 4L80E VS racing 78/75 turbo and other things
    1.56 60' 6.80 1/8 @ 104 mph 10.5 1/4 @129 mph
    #BSTDMRC #LSSWAPPEDMARAUDER
    Instagram -
    Cheapthrillb2
    lsswappedmarauder

  3. #48
    Join Date
    Sep 2006
    Location
    Clermont Florida
    Posts
    3,070
    Great build thread !!!

    One of the coolest to date.

    It never ceases to amaze me what folks do to these cars. Nice read.

    When you change the intake to the SS Trailblazer one, are you going to have clearance to get the stock one back on?

    I didn't catch it but, did you put the stock tips back on?

  4. #49
    Join Date
    Dec 2014
    Location
    Hastings, mi
    Age
    43
    Posts
    344
    Clearance for what with the intake?


    When I redo the exhaust. I'm gonna run a single tailpipe to the Rr. I gutted the stock tip (resonator), so I'll run that out. But hang the drivers side as a dummy tip for appearance lol.
    2003 budget built marauder-LM7 5.3 SBE 4L80E VS racing 78/75 turbo and other things
    1.56 60' 6.80 1/8 @ 104 mph 10.5 1/4 @129 mph
    #BSTDMRC #LSSWAPPEDMARAUDER
    Instagram -
    Cheapthrillb2
    lsswappedmarauder

  5. #50
    Join Date
    Sep 2006
    Location
    Clermont Florida
    Posts
    3,070
    Quote Originally Posted by cheapthrillb2 View Post
    Clearance for what with the intake?


    When I redo the exhaust. I'm gonna run a single tailpipe to the Rr. I gutted the stock tip (resonator), so I'll run that out. But hang the drivers side as a dummy tip for appearance lol.
    Nice

    Yes clearance for a stock hood for the ultimate stock sleeper look.

  6. #51
    Join Date
    Dec 2014
    Location
    Hastings, mi
    Age
    43
    Posts
    344
    I'm not sure. It's super close.
    2003 budget built marauder-LM7 5.3 SBE 4L80E VS racing 78/75 turbo and other things
    1.56 60' 6.80 1/8 @ 104 mph 10.5 1/4 @129 mph
    #BSTDMRC #LSSWAPPEDMARAUDER
    Instagram -
    Cheapthrillb2
    lsswappedmarauder

  7. #52
    Join Date
    Mar 2008
    Location
    Next door to my neighbor
    Age
    50
    Posts
    20,353
    Looking good! BTW, you are only about 4psi away from blowing off the HVAC vacuum line. I consider that a good thing.

    P.S. So far super glue seems to hold quite well at least up to 26#s.


    Sent from my iPhone using Tapatalk Pro
    SOLD 12/31/2021

    Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.

  8. #53
    Join Date
    Dec 2014
    Location
    Hastings, mi
    Age
    43
    Posts
    344
    All the vacumn lines are zip tied tight. And everything vacumn oriented on the dash side has a check valve in the line preventing boost from hitting the eatc etc.
    2003 budget built marauder-LM7 5.3 SBE 4L80E VS racing 78/75 turbo and other things
    1.56 60' 6.80 1/8 @ 104 mph 10.5 1/4 @129 mph
    #BSTDMRC #LSSWAPPEDMARAUDER
    Instagram -
    Cheapthrillb2
    lsswappedmarauder

  9. #54
    Join Date
    Dec 2014
    Location
    Hastings, mi
    Age
    43
    Posts
    344
    Put in a few hrs today. Stripped the interior, running battery cables and audio stuff etc. Mounting a platform (just hanging loose in pics) for my amps, plan on putting some circuit breakers, fuse panel, battery charging posts, and a battery disconnect on it as well with all wires hidden behind. Also building a trunk organizer platform on the bottom, hide the battery in the bottom of it.

    20190113_142658 by Cheapthrillb2, on Flickr

    20190113_123023 by Cheapthrillb2, on Flickr

    20190113_142711 by Cheapthrillb2, on Flickr

    It looks vertical, but it's not. It's on a angle.

    I also received my new adjustable fuel pressure regulator, just waiting for my injectors to come back in to reassemble that.

    I found a 2gb flash drive under the carpet in the car. It's loaded with about every type of music imaginable. Shows it was last loaded with music in 2011.





    Whats the circuit looking patch thing glued to the passenger floorboard under the carpet?
    2003 budget built marauder-LM7 5.3 SBE 4L80E VS racing 78/75 turbo and other things
    1.56 60' 6.80 1/8 @ 104 mph 10.5 1/4 @129 mph
    #BSTDMRC #LSSWAPPEDMARAUDER
    Instagram -
    Cheapthrillb2
    lsswappedmarauder

  10. #55
    Join Date
    Dec 2014
    Location
    Hastings, mi
    Age
    43
    Posts
    344
    Gonna increase the rear tire size. Looking for a little bigger footprint.

    Old was 18x9 245/55-18

    New is 20x10 285/40-20

    20190118_134451 by Cheapthrillb2, on Flickr

    20190118_134324 by Cheapthrillb2, on Flickr

    20190118_133742 by Cheapthrillb2, on Flickr

    Also put some work in on the trunk.

    20190118_162319 by Cheapthrillb2, on Flickr

    20190118_174955 by Cheapthrillb2, on Flickr
    20190118_181524 by Cheapthrillb2, on Flickr
    2003 budget built marauder-LM7 5.3 SBE 4L80E VS racing 78/75 turbo and other things
    1.56 60' 6.80 1/8 @ 104 mph 10.5 1/4 @129 mph
    #BSTDMRC #LSSWAPPEDMARAUDER
    Instagram -
    Cheapthrillb2
    lsswappedmarauder

  11. #56
    Join Date
    Jul 2004
    Location
    The Dirty South
    Age
    52
    Posts
    3,836
    Nice and clean

  12. #57
    Join Date
    Dec 2014
    Location
    Hastings, mi
    Age
    43
    Posts
    344
    2019-01-19_07-46-04 by Cheapthrillb2, on Flickr


    So much yet to do.


    I did hear that my injectors made it safely to Hawaii and should be on the return Monday. That exciting. Hopefully get the intake back together so I can get the new rail and fuel pressure regulator installed.
    2003 budget built marauder-LM7 5.3 SBE 4L80E VS racing 78/75 turbo and other things
    1.56 60' 6.80 1/8 @ 104 mph 10.5 1/4 @129 mph
    #BSTDMRC #LSSWAPPEDMARAUDER
    Instagram -
    Cheapthrillb2
    lsswappedmarauder

  13. #58
    Join Date
    Dec 2014
    Location
    Hastings, mi
    Age
    43
    Posts
    344
    Looking at shifters. Trying to find something that'll play nice with the console and my 4l80. So hard not being able to just test fit stuff w/o buying.
    2003 budget built marauder-LM7 5.3 SBE 4L80E VS racing 78/75 turbo and other things
    1.56 60' 6.80 1/8 @ 104 mph 10.5 1/4 @129 mph
    #BSTDMRC #LSSWAPPEDMARAUDER
    Instagram -
    Cheapthrillb2
    lsswappedmarauder

  14. #59
    Join Date
    Dec 2014
    Location
    Hastings, mi
    Age
    43
    Posts
    344
    #BSTDMRC #LSSWAPPEDMARAUDER by Cheapthrillb2, on Flickr

    #BSTDMRC #LSSWAPPEDMARAUDER by Cheapthrillb2, on Flickr
    Today's project. Drove to lane automotive (1.5 hrs one way) to put hands on the B&m and tci shifters. Didn't know which I wanted so wanted to feel them out..... Well they are absolutely identical. I couldn't find a difference in any way between the two. Pretty happy with the turn out aside from the screw heads in the panel. But couldn't come up with a way to make the indicator bezel tight to it w/o doing it. Thankfully I had spare center console parts to practice with.

    Old shifter didn't line up with gear pattern (Ford VS Chevy) and had no lockout from park to first so any bump of the shifter and it moved easily. I hit neutral at the track on accident and bounced it over 7k and 16 psi at 120mph.

    I was bummed I didn't get a mullet in the box or a foot shaped gas pedal.

    I would of got an outlaw shifter or Diablo style but since I do drive it on the street the reverse lockout lever seemed it would get pretty old pretty fast. And I wasn't sure how clean of a install I could make with that style.
    2003 budget built marauder-LM7 5.3 SBE 4L80E VS racing 78/75 turbo and other things
    1.56 60' 6.80 1/8 @ 104 mph 10.5 1/4 @129 mph
    #BSTDMRC #LSSWAPPEDMARAUDER
    Instagram -
    Cheapthrillb2
    lsswappedmarauder

  15. #60
    Join Date
    Jul 2004
    Location
    The Dirty South
    Age
    52
    Posts
    3,836
    Someone made an aluminum bezel that was engraved back in the day. Find one and it should cover the screws
    IIRC it was FBM

Page 4 of 14 FirstFirst 1234567891011 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Similar Threads

  1. Ford Bastard's 5th annual Track Day!
    By SID210SA in forum Alamo Area Marauders
    Replies: 6
    Last Post: 04-04-2009, 07:11 PM
  2. Mercury Marauder - still the bastard stepchild of Ford!
    By mrjones in forum Community Discussion
    Replies: 28
    Last Post: 03-08-2007, 03:16 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •