60's Street-Strip Racer
Torque(less) wrench
I have a Brownline 1/2 inch drive digital torque wrench that has always been a bit difficult to figure out, that has never seemed to work exactly as the instructions show. At least for me it hasn't Now despite a battery change it doesn't work at all. Where can I send it for repairs? With warmer weather coming, I can get into my garage again, and I find that I really need it.
Ride 1: 2003 300-A MM, black (naturally), K&N cold air, Granitelli Racing coils, Kybe shocks, Autometer "real" oil pressure and voltmeter, 14 inch front rotors and stainless lines from TCE with 6-piston Wilwood calipers and Hawk HPS pads, cryo-treated slotted rear rotors with TCE stainless lines and Hawk HPS pads, tune by Lidio, LED headlamps. Coming Soon: LED foglights, 200 Amp Alternator.
Ride 2: 2001 Kenny Brown "Panther 2" Crown Victoria, Black. K&N cold air intake to Allen Engine Development supercharger system with water-to-air intercooled Eaton MP-90 at 8 pounds. Extensive chassis bracing, Brembo 4-piston front calipers on 13 inch rotors with stainless lines. Trunk-relocated Optima Red-Top. 5000K Bi-Xenon HID's. And much, much more.
Sick-Speed play toy
They are out of Chicago or the burbs. Mine worked great until it didn’t at all. They warrantied it and the second one broke right away again. It’s been a paper weight for probably 4-5 years now..
Sent from my iPhone using Tapatalk Pro
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
Supporting Member
I had one, batteries were always dead when I needed it, and then the threaded insert for the battery compartment came out of the housing and I tossed it… click style torque wrenches never have these problems
2003 Black - sold, back again, and sold
2003 DBP/DC - #153 Whipple 3.4 (permanent garage art)
2003 DBP/LF - # 36 sold
2003 DBP/LF - # 205 sold
2004 Black - Trilogy #43, 288k and driven daily
2003 Black - sold and back again
2004 DTR - sold
Junior Member
Purchased a 3/8” & 1/2”torque wrench from Harbor Freight. They each work just fine.
2004 marauder black purchased new. Sold 9/16 at 297,000 miles. Still ran strong didn't burn a drop of oil.
2003 marauder black 28,000 miles all stock. Garage Queen.
2004 marauder red daily driver.
Senior Member
I remember I won one of those Brownlines at the raffle in Louisville in 2014 or 2015; I sold it to someone shortly after the raffle was over b/c I knew I would never use it.
Sick-Speed play toy
I remember the exact same thing Derek! I think the key to these is to use it at least weekly or remove the battery.Originally Posted by Comin' in Hot
I will say when I used it on the Marauder heads it was simply awesome.
Sent from my iPhone using Tapatalk Pro
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote