Page 1 of 2 12 LastLast
Results 1 to 15 of 16

Thread: Trunk Organizer

  1. #1
    Join Date
    Dec 2014
    Location
    West Palm Beach, Florida
    Posts
    91

    Trunk Organizer

    I have absolutely no idea what these go for so if price is too high or too low just shoot me an offer..
    The organizer has some wear and tear but overall would be a 6 or 7/10.. located in West Palm Beach, FL.. $250 obo







    Sent from my iPhone using Tapatalk
    Last edited by GrahamGraczyk; 07-23-2024 at 12:33 PM.
    360 Marauder

  2. #2
    Join Date
    Mar 2004
    Location
    Baltimore, Md.
    Age
    65
    Posts
    11,669
    That's a fair price.
    Some people are asking $600+ and higher for good condition trunk organizers.
    Ones in decent condition are getting hard to find.
    2020 Ford Ranger STX DFI Turbo 2.3L 10 speed Auto
    2017 Ford Fusion Sport DFI Twin Turbo 2.7L V6 6 speed Auto (14.000 ET bone stock in 82 degree heat)
    1985 Mustang GT 5.0 Hatchback 4bbl 5 speed manual (525 HP 363 Dart block/AFR heads with Magnum 6 speed in the works)
    1984 Mustang GT 2.3 Turbo Convertible FI. 5 speed manual
    1966 427 Cobra (ERA) 468 all Aluminum FE 2x4bbl 5 speed manual

    SOLD : 2003 Mercury Marauder FI. 4 speed Auto
    w/Crower Cams & Springs, +1mm SS valves, mild port job on the cylinder heads.
    Extrude honed intake w/PHP spacer.
    Kooks Headers w/2.5" High Flow Cats & X-Pipe, Magnaflow mufflers, OEM tailpipes w/Megs Tips
    B&M Trans cooler w/fan, Level 10 Shift Kit, Art Carr Hughes Deep Sump Trans Pan,
    SVO Rearend Girdle, Redline Gear lube; OEM 3.55s
    'Real Gauges' + matching Trans Temp, Oil Temp, Water Temp, Fuel Pressure, Vacuum/Boost Gauge
    Built: 10/15/02 Bought: 12/16/02 Sold: 10/15/18

  3. #3
    Join Date
    May 2022
    Location
    Great White North
    Posts
    44
    Does everyone else have the rubber mat on the inside?
    If it's supposed to be there I am missing mine.
    I guess I can make one.

  4. #4
    Join Date
    May 2009
    Location
    Moreau Island
    Posts
    12,238
    Got one in each one of ours.

  5. #5
    Join Date
    May 2019
    Location
    Harrisburg, NC
    Age
    53
    Posts
    392
    Would you have any idea how much it would cost to ship to 28075?

  6. #6
    Join Date
    Dec 2014
    Location
    West Palm Beach, Florida
    Posts
    91
    I’ll check


    Sent from my iPhone using Tapatalk
    360 Marauder

  7. #7
    Join Date
    Feb 2023
    Location
    San Antonio Texas
    Age
    52
    Posts
    27
    Hello have you sold this?

  8. #8
    Join Date
    Dec 2014
    Location
    West Palm Beach, Florida
    Posts
    91
    Still got it


    Sent from my iPhone using Tapatalk
    360 Marauder

  9. #9
    Join Date
    Nov 2012
    Location
    Sacramento
    Posts
    3,759
    Shipping these is the main issue. You have to blue tape solidly closed, pad, and then box. It it the dimensions, not weight, that make these a beast.


    2003 300A Black, #4918 of 7838, 17,400 Miles
    Tune, KYB's, JLT, FlowMaster 42441, Res Delete, New BFG's, 8 coats of zymoil Titanium

    2003 300B Silver Birch, #21 of 419, 29,800 miles
    Tune, JLT, FlowMaster 42441 Res Delete, New Nitto 235/255 Bigcarsforever dead peddle & custom SRP peddles, 5 coats Zymoil Titanium, Addco front and rear sway bars, KYBs, 1/2 inch coil cut, Sparta Watts link and Control Arms, Carfixer alignment.

    2003 CV Sport Matador Red, 19,280 Miles, DD, Curless Full Service Royal flush, Marto Tune, 18 Chrome Wheels w 235/265 front/back Nitto tires, NEW OEM Sport Springs -1 coil & Monroe Severe Duty (front) shocks, Addco front and rear sway bars, KYB rear Shocks, Carfixer Alignment.

    2004 CV HPP Silver Birch, 93,000 miles. Son's DD, 18 Chrome Wheels w 235/265 front/back Nitto tires (thank you Lowndex!)

  10. #10
    Join Date
    Apr 2010
    Location
    South Florida
    Age
    34
    Posts
    1,882
    Quote Originally Posted by 1Marauder View Post
    Shipping these is the main issue. You have to blue tape solidly closed, pad, and then box. It it the dimensions, not weight, that make these a beast.
    Very easily to ship on a GreyHound bus. I've done it.


    Sent from my iPhone using Tapatalk Pro

  11. #11
    Join Date
    Nov 2012
    Location
    Sacramento
    Posts
    3,759
    Yes, didn't mean to imply it was impossible, just difficult. Most folks don't think of "Greyhound" for shipping. And you need substantial cardboard to custom make box.


    2003 300A Black, #4918 of 7838, 17,400 Miles
    Tune, KYB's, JLT, FlowMaster 42441, Res Delete, New BFG's, 8 coats of zymoil Titanium

    2003 300B Silver Birch, #21 of 419, 29,800 miles
    Tune, JLT, FlowMaster 42441 Res Delete, New Nitto 235/255 Bigcarsforever dead peddle & custom SRP peddles, 5 coats Zymoil Titanium, Addco front and rear sway bars, KYBs, 1/2 inch coil cut, Sparta Watts link and Control Arms, Carfixer alignment.

    2003 CV Sport Matador Red, 19,280 Miles, DD, Curless Full Service Royal flush, Marto Tune, 18 Chrome Wheels w 235/265 front/back Nitto tires, NEW OEM Sport Springs -1 coil & Monroe Severe Duty (front) shocks, Addco front and rear sway bars, KYB rear Shocks, Carfixer Alignment.

    2004 CV HPP Silver Birch, 93,000 miles. Son's DD, 18 Chrome Wheels w 235/265 front/back Nitto tires (thank you Lowndex!)

  12. #12
    Join Date
    Aug 2011
    Location
    Washington State
    Posts
    2,115
    Quote Originally Posted by 03Merc View Post
    Very easily to ship on a GreyHound bus. I've done it.
    Only IF, there is a local Greyhound station near buyer and seller.

  13. #13
    Join Date
    Jun 2003
    Location
    Timbuk3, MI
    Posts
    2,441
    1Marauder - Yes, didn't mean to imply it was impossible, just difficult. Most folks don't think of "Greyhound" for shipping. And you need substantial cardboard to custom make box.
    Have used Greyhound numerous times in the past for awkward parts. e.g. Raptor bumpers, various rims and wheels, etc..

    And cardboard isn't really necessary. In case of the front bumpers - bubble-wrap and then a old, used moving pad wrapped with packing tape. Rims | wheels - bubble-wrap encased with packing tape.

    But, as NXBOB noted... There needs to be a Greyhound terminal within a reasonable distance for the buyer. But then, for me that hasn't ever posed an issue.
    .

  14. #14
    Join Date
    Dec 2014
    Location
    West Palm Beach, Florida
    Posts
    91
    Still available, price drop. Will work out shipping or delivery with anyone interested..
    360 Marauder

  15. #15
    Join Date
    Jul 2020
    Location
    Arlington, VA
    Age
    35
    Posts
    14
    PM sent, very interested!

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Wanted To Buy WTB: trunk organizer
    By jmsa540 in forum Marauder Parts/Misc. Wanted
    Replies: 7
    Last Post: 12-06-2014, 09:59 AM
  2. Trunk organizer.
    By Embassy in forum Marauder Parts/Misc. Wanted
    Replies: 0
    Last Post: 03-13-2008, 12:46 PM
  3. Trunk Organizer
    By MACFORD88 in forum The Lounge
    Replies: 15
    Last Post: 01-22-2008, 03:59 PM
  4. Trunk Organizer
    By Ross in forum Other Parts/Misc. Wanted
    Replies: 3
    Last Post: 12-05-2007, 01:40 PM
  5. Trunk organizer
    By Al Goguen in forum Sunshine State Marauders
    Replies: 8
    Last Post: 07-19-2005, 11:04 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •