I am interested.
BackinBlack
I am interested.
Supporting Member
If you can't reach him for the custom crossover, this works as well.Originally Posted by photog
https://www.lethalperformance.com/on...port-ccd2.html
That's what I'm running on my Trilogy. Photos here:
https://www.mercurymarauder.net/foru...ed!-Trilogy-39
Just be sure you buy the "2 Port" version. That's the version made for two temperature sensors, since that's what we have.
Weißbirke Plünderer
Jerry has been notified of this post about his stainless COT
2004 SB Ported Trilogy 48
Has supporting mods and stuff
Thanks to Marty O for his help in updating this car.
R.I.P.
Rex "SC Cheesehead"
BackinBlack
I am interested. My dealer is down to considering JB weld.
BackinBlack
My marauder is bone stock and a street driver so don't think that would work. Or would it?
Junior Member
Send me some info on this I might need a new COT too.
BackinBlack
My guy is attempting to fix my COT with JB weld. We'll see how it goes.
Junior Member
I'd be interested too in the CoT from Lji372, price and lead time?
T242 - Ricer ricer
I just texted Jerry you are interested in COTs.
Sent from my iPhone using Tapatalk
WLB
BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
______________________________ ___________
BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
#2912 of 7093
Conceived 8/6/2002
Delivered 9/19/2002
Adopted 8/10/2011
Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
Pioneer 6x8 Front
Legacy 600w 6x9 Rears
JL 6.5 SubWoofer
K&N CAI
Window tint 50% rear/35% front
FBM CHMSL with Strobe mod 7/1/12
DR Deep Aluminum Trans Pan
Sparta FOMOCO Racing 8.8 Girdle
Mo's Dyno Tune
Gorilla Nuts - The System
Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
Powder Coat Axle Housing 7/1/12
CME HP Rear Control Arms & Watts Link 7/1/12
______________________________ ________________
Rex "SC Cheesehead" Weinbender 11-14-13
Ed "Baaad GN" Linthicum 8-6-2014
BackinBlack
Please text Lji372 as I need a coolant crossover tube made. I'm at my wits end. Thank you.
BackinBlack
No luck with the JB weld and the local welder could not do it. It has to be fabricated.
Weißbirke Plünderer
Jerry is in Louisville,KY at Marauder meet this weekend. I messaged him earlier and a member that is in Louisville for meet texted him. He runs a busy shop so you may have to be patient.
2004 SB Ported Trilogy 48
Has supporting mods and stuff
Thanks to Marty O for his help in updating this car.
R.I.P.
Rex "SC Cheesehead"
BackinBlack
Well I've waited four and a half months I guess I can wait a little bit longer. Thanks for messaging him.
Member
eBay is your friend.
Sent from my iPhone using Tapatalk
Junior Member
I would be interested in a Stainlees one if you could help.Thanks
2003A Marauder
11.957 @ 116.03
SSHS8 Runner Up Class B
Novi 1200- 465 hp
Ford Racing 4.10, 31 spline Cobra carrier & axles, PI 3500
SW Long Tube
There are currently 2 users browsing this thread. (0 members and 2 guests)
Posting Permissions
Reply With Quote
