Results 1 to 3 of 3

Thread: Car Stalling from a dead stop

  1. #1
    Join Date
    Feb 2005
    Location
    DC MD Area
    Age
    44
    Posts
    1,777

    Car Stalling from a dead stop

    Having a lil problem think it's with misfire from a bad coil. While sitting at a light I press the accelerator and the car is sluggish, stalling then the power builds up and all it goes. Driving at highway speeds no problem at all. This only happens when I'm at a dead stop at a light or stop sign. BTW no codes have popped up. Sometimes it doesn't do it at all from a dead stop.


    I have dual Aeromotive 340 pumps, dual FPDMs, KB BAP all upgraded wiring.

    I did swap my FPDM's, FRPS, and installed a new fuel filter so I can rule that out. Its been a while but I think I recall CV's GM, MM's will have misfires and not throw a code. I was going to put the coil pack covers and inspect each coil for any moisture today. Any thoughts?


    2003 300A Black MM
    Quote Originally Posted by magindat View Post
    Modding a Marauder is a classy, time taking experience - like sipping fine aged spirits. It's meant to take your time, savor, and enjoy!!!!
    FRPP ALUMINATOR MOTOR 10:1
    BC AUTOMOTIVE TRANNY 2800 STALL
    TRILOGY S/C WITH POSI PERFORMANCE PORT
    STAINLESS WORKS LT HEADERS
    METCO REAR CONTROL ARMS AND WATTS LINK
    ADDCO FRONT & REAR SWAY BAR
    MONROE HD QUICK STRUTS FRONT
    QA1 ADJUSTABLE REAR SHOCKS
    EATON LIMTED SLIP DIFF:FORD RACING 4.10'S
    DUAL AEROMOTIVE 340LPH PUMPS, 40AMP BAP, WITH DUAL FPDM'S
    ZACKS BIG BRAKE SWAP w/ TCE SS LINES
    SCANGAUGE MONITORING....^....^....^
    ALL SECURIED WITH A VIPER SECURITY SYSTEM REMOTELY STARTED BY MY VIPER IPHONE APP

  2. #2
    Join Date
    Sep 2005
    Location
    APPLE VALLEY,CA
    Age
    60
    Posts
    1,397
    Also check the battery cable with the ground attached (positive black)
    I had a short just by jiggling the ground.
    Battery mart changed the plug and separated the 2 cables so they don’t touch anymore. No more problem


    Sent from my iPhone using Tapatalk

  3. #3
    Join Date
    Feb 2005
    Location
    DC MD Area
    Age
    44
    Posts
    1,777
    The problem was the O2 Sensors. No code however I replaced all 4. And after that I replaced the EGR valve for good measure.


    2003 300A Black MM
    Quote Originally Posted by magindat View Post
    Modding a Marauder is a classy, time taking experience - like sipping fine aged spirits. It's meant to take your time, savor, and enjoy!!!!
    FRPP ALUMINATOR MOTOR 10:1
    BC AUTOMOTIVE TRANNY 2800 STALL
    TRILOGY S/C WITH POSI PERFORMANCE PORT
    STAINLESS WORKS LT HEADERS
    METCO REAR CONTROL ARMS AND WATTS LINK
    ADDCO FRONT & REAR SWAY BAR
    MONROE HD QUICK STRUTS FRONT
    QA1 ADJUSTABLE REAR SHOCKS
    EATON LIMTED SLIP DIFF:FORD RACING 4.10'S
    DUAL AEROMOTIVE 340LPH PUMPS, 40AMP BAP, WITH DUAL FPDM'S
    ZACKS BIG BRAKE SWAP w/ TCE SS LINES
    SCANGAUGE MONITORING....^....^....^
    ALL SECURIED WITH A VIPER SECURITY SYSTEM REMOTELY STARTED BY MY VIPER IPHONE APP

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Stalling?
    By 03MERCURY in forum Shop Talk
    Replies: 8
    Last Post: 08-18-2015, 04:16 AM
  2. Stalling
    By Wheeler in forum Shop Talk
    Replies: 18
    Last Post: 06-25-2014, 09:38 PM
  3. 12 dead in Navy Yard shooting; 1 suspect dead, 2 sought
    By MERCMAN in forum Community Discussion
    Replies: 11
    Last Post: 09-17-2013, 07:16 AM
  4. Stalling out
    By TCBO1 in forum Shop Talk
    Replies: 2
    Last Post: 01-11-2008, 09:32 AM
  5. It's Stalling on me!
    By DeadVic in forum Community Discussion
    Replies: 3
    Last Post: 11-08-2003, 01:29 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •