Been a while.....

[Todd TCE]

Greetings Marauder and Panther owners!

Been quite a while since I've posted to say the least. If you follow TCE on Instagram you know the shops been very busy the past few years on custom builds. From race set ups to vintage to the Big Wheel market. TCE has become the premier referral from Wilwood for custom work fielding calls daily for "Wilwood says you can help me with my..." project. The past couple of years has been very busy in the 60s with Cadillac and Lincoln projects for the old school guys to Trailblazer SS builds for the younger crowd as well as the Go-To for the Donk market.

So what's new here in Marauder land??

About 5yrs ago Wilwood took over production of our 13" FNSL6 kit. Seems there were more than a few calls to why TCE was their only dealer for this kit.....Well, that's because we started it in 2004 and did so with much of our own 'house' product. That market was largely driven by the F100 transplant popularity of your clip into old trucks via the customizers and TV market. And logically they also, as TCE did took in the 14" formula too. As well as the 14" Aero6 kits~! No surprise as we'd established the market and done much of the ground work. The good news of course is that the cost of these kits is less. You can get the same basic kits today for the same or maybe even less than we offered them 15yrs ago. Can't say that too often!

Below: 13 FNSL6, 14 FNSL6 and 14 Aero6


brake_kit_140-14680-DR-sm.jpg brake_kit_140-14681-DR-sm.jpg brake_kit_140-14682-DR-sm.jpg




*Note that TCE still offers the Narrow rotor (1.10 vs 1.25" TCE vs Wilwood) for the stock MM wheel. The 14" MM kit we still produce is the ONLY kit that will fit your wheel without a healthy spacer.

TCE is still the home of the 15 and even limited production 16" front kit. And! The only place you'll get a matching rear kit! Today that rear kit is available only in 14" size with the radial mount FNSL4 caliper.

P1010126.jpg


Today you have many choices:
Wilwood 13" FNSL6
Wilwood 14" FNSL6
TCE/Wilwood 14" FNSL MM exclusive
Wilwood 14" Aero6
TCE/Wilwood 15" Aero6
TCE/Wilwood 16" TC6R

All of these (except the 13" kit due to cars coming with 18" wheel) are on the TCE WEBPAGE


And of course: TCE is still your home for Braided Stainless Steel hose. Both stock and Zack kit needs.

Questions or comments just let me know.

[Todd TCE]

BTW...I have oversized C-clips for your rear axle needs. Standard in all TCE rear kits but available each on the webpage under the Products tab

[SilverPhoenix]

I purchased a set of your stainless steel braided hoses and installed them on my MM around 12 years ago and they're still on my car today, 100k miles later, no issues.

[Todd TCE]

I purchased a set of your stainless steel braided hoses and installed them on my MM around 12 years ago and they're still on my car today, 100k miles later, no issues.

Good to hear!

* I know the owner of an Impala SS who was the first 13" front kits I built, still has them some 300k later!